CGA ISO-10691-气瓶液化石油气（LPG）用可重复充装焊接钢瓶.充装前、充装中和充装后的检查程序-国家数字标准馆

现行 CGA ISO-10691

到馆提醒

收藏跟踪

购买正版

Gas cylinders-Refillable welded steel cylinders for liquefied petroleum gas (LPG)-Procedures for checking before, during and after filling 气瓶液化石油气（LPG）用可重复充装焊接钢瓶.充装前、充装中和充装后的检查程序

发布日期： 2004-08-15

本国际标准规定了检查可运输可再充装罐时应采用的程序
填充之前、期间和之后的焊接钢制液化石油气钢瓶。适用于水容量为0.5l至150l（含）的可运输可再充装焊接钢制液化石油气钢瓶。它不适用于永久安装在车辆上的气瓶，也不适用于工厂和灌装设备。

This International Standard specifies the procedures to be adopted when checking transportable refillable
welded steel LPG cylinders before, during and after filling.It applies to transportable refillable welded steel LPG cylinders of water capacity from 0.5l up to and including 150l.It does not apply to cylinders permanently installed in vehicles, or to plant and filling equipment.

分类信息

发布单位或类别：美国-美国压缩气体协会

关联关系

研制信息

相似标准/计划/法规

액화 석유 가스용 용접 강재 실린더(재충전용)
液化石油气用焊接钢瓶（可重新填充）

액화 석유 가스용 용접 강재 실린더(재충전용)
液化石油气的焊接钢瓶（充气式）

KS B 6219(2021 Confirm)

용접 강제 액화 플루오로카본 용기
液化氟碳化合物用可再填充焊接钢气瓶

KS B 6219(2016 Confirm)

용접 강제 액화 플루오로카본 용기
再填充焊接钢质燃气液化气氟碳

KS B ISO 22991(2019 Confirm)

가스 용기 — 운반 가능한 재충전용 용접 강제 LPG 용기 — 설계 및 제조
气瓶 - 用于液化石油气（LPG）的可运输的可再填充焊接钢瓶 - 设计和施工

Gas cylinders — Refillable welded steel cylinders for liquefied petroleum gas (LPG) — Periodic inspection and testing
气瓶——液化石油气（LPG）用可再填充焊接钢瓶——定期检查和测试

KS B ISO 22991(2024 Confirm)

가스 용기 — 운반 가능한 재충전용 용접 강제 LPG 용기 — 설계 및 제조
气瓶液化石油气（LPG）用可运输可再充装焊接钢瓶的设计和构造

Gas cylinders-Refillable welded steel cylinders for liquefied petroleum gas (LPG)-Periodic inspection and testing
气瓶液化石油气（LPG）用可再填充焊接钢瓶.定期检验和试验

Gas cylinders — Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) — Design and construction
气瓶——液化石油气（LPG）用可运输可再填充焊接钢瓶——设计与施工

BS EN 13322-2-2003

Transportable gas cylinders. Refillable welded steel gas cylinders. Design and construction-Stainless steel
可运输的气瓶可重新填充的焊接钢气瓶设计与施工

BS EN 13322-1-2003+A1-2006

Transportable gas cylinders. Refillable welded steel gas cylinders. Design and construction-Carbon steel
可运输的气瓶可重新填充的焊接钢气瓶设计与施工

Gas cylinders — Refillable welded steel cylinders — Test pressure 60 bar and below
气瓶可再充装焊接钢瓶试验压力60巴及以下

Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 2: Stainless steel
可运输气瓶.可再填充焊接钢气瓶.设计和结构.第2部分:不锈钢；德文版EN 13322-2:2003+A1:2006

UNE-EN 13322-1-2003

Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 1: Carbon steel
可运输气瓶.可再填充焊接钢气瓶.设计和结构.第1部分:碳钢

BS ISO 18172-1-2007

Gas cylinders. Refillable welded stainless steel cylinders-Test pressure 6 MPa and below
气瓶可重复充装的焊接不锈钢气瓶

BS ISO 18172-2-2007

Gas cylinders. Refillable welded stainless steel cylinders-Test pressure greater than 6 MPa
气瓶可重复充装的焊接不锈钢气瓶

ISO 18172-1-2007

Gas cylinders — Refillable welded stainless steel cylinders — Part 1: Test pressure 6 MPa and below
气瓶——可再填充焊接不锈钢气缸Spart 1:试验压力6 MPa及以下

Gas cylinders — Refillable welded steel cylinders for liquified petroleum gas (LPG) — Procedures for checking before, during and after filling
气瓶——液化石油气（LPG）用可再填充焊接钢瓶——填充前、填充期间和填充后的检查程序

BS EN 1440-2016+A2-2020

LPG equipment and accessories. Transportable refillable traditional welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders. Periodic inspection
液化石油气设备和配件可运输、可重复填充的传统焊接和钎焊钢制液化石油气（LPG）钢瓶定期检查

ISO 18172-2-2007

Gas cylinders — Refillable welded stainless steel cylinders — Part 2: Test pressure greater than 6 MPa
气瓶——可再填充焊接不锈钢气缸Spart 2:试验压力大于6 MPa

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统