本文件已被宣布为“稳定”，不再接受货币定期审查。用户负责验证参考资料和持续适用性或技术要求。新技术可能存在。本规范涵盖了一种单组分氟硅酮（FVMQ）粘合剂/密封剂，以盒式供应，适用于在暴露于空气中时挤出并固化成弹性材料。它还包括一种兼容的底漆。该粘合剂/密封剂通常用于粘接固化氟硅橡胶，以及要求耐-65至+400华氏度（-54至+204摄氏度）的燃料、油或溶剂的密封应用。但使用并不局限于此类应用。本产品不应用于fay表面密封或无法保持暴露在空气中的类似应用。本产品的厚度不应大于0。 25英寸（6.4毫米），尤其是在涉及封装的应用中。

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.This specification covers a one-part fluorosilicone (FVMQ) adhesive/sealant, supplied in cartridges, suitable for extrusion and curing to an elastomeric material upon exposure to air. It also covers a compatible primer.This adhesive/sealant has been used typically for bonding cured fluorosilicone rubber and for sealing applications requiring resistance to fuels, oils, or solvents from -65 to +400 degrees F (-54 to +204 degrees C). but usage is not limited to such applications. This product should not be used for fay surface sealing or similar applications where exposure to air cannot be maintained. This product should not be used in thicknesses greater than 0.25 inch (6.4 mm), particularly in applications involving encapsulation.