BS ISO 20816-8:2018建立了往复式压缩机系统机械振动测量和分类的程序和指南。振动值主要被定义为对压缩机系统的振动进行分类，并避免在往复式压缩机系统中的部件（即基础、压缩机、阻尼器、管道和安装在压缩机系统上的辅助设备）的疲劳问题。不考虑轴振动。本文件适用于安装在刚性基础上的往复式压缩机，其典型转速额定值范围为120 r/min至1800 r/min（含1800 r/min）。所给出的一般评估标准与运行测量有关。这些标准还用于确保机器振动不会对直接安装在机器上的设备产生不利影响，例如脉动阻尼器和管道系统。 交叉引用:ISO 2041ISO 13707ISO 18431-1ISO 5348ISO 2954ASME B31。3VDI 3842API 618ISO 20816-1ISO 10816（所有部分）ISO 13373-2VDI 3839ISO 13373-1ISO 13373-3VDI 3838ISO 18431-2ISO 6708购买本文件时提供的所有当前修订版均包含在购买本文件中。

BS ISO 20816-8:2018 establishes procedures and guidelines for the measurement and classification of mechanical vibration of reciprocating compressor systems. The vibration values are defined primarily to classify the vibration of the compressor system and to avoid fatigue problems with parts in the reciprocating compressor system, i.e. foundation, compressor, dampers, piping and auxiliary equipment mounted on the compressor system. Shaft vibration is not considered.This document applies to reciprocating compressors mounted on rigid foundations with typical rotational speed ratings in the range 120 r/min up to and including 1 800 r/min. The general evaluation criteria which are presented relate to operational measurements. The criteria are also used to ensure that machine vibration does not adversely affect the equipment directly mounted on the machine, e.g. pulsation dampers and the pipe system.Cross References:ISO 2041ISO 13707ISO 18431-1ISO 5348ISO 2954ASME B31.3VDI 3842API 618ISO 20816-1ISO 10816 (all parts)ISO 13373-2VDI 3839ISO 13373-1ISO 13373-3VDI 3838ISO 18431-2ISO 6708All current amendments available at time of purchase are included with the purchase of this document.