现行

BS ISO 19973-4-2014

Pneumatic fluid power. Assessment of component reliability by testing-Pressure regulators
气动流体动力 通过测试评估组件的可靠性 压力调节器

2014-03-31

现行

ISO 19973-4-2014

Pneumatic fluid power — Assessment of component reliability by testing — Part 4: Pressure regulators
气动流体动力——通过试验评估部件可靠性第4部分:压力调节器

2014-02-25

现行

BS 11/30239903 DC

BS EN 15013. Plastics piping systems. Non-pressure drainage and sewerage piping components buried in ground. Requirements and test/assessment methods for pipes and fittings
英国标准EN 15013 塑料管道系统 埋入地下的无压排水和污水管道组件 管道和配件的要求和试验/评估方法

2011-03-21

现行

ISO 3603-1977

Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints — Pressure test for leakproofness
带弹性密封圈式接头的未增塑聚氯乙烯（PVC）压力管配件——密封性压力试验

1977-04-01

现行

BS EN ISO 22435-2007+A1-2012

Gas cylinders. Cylinder valves with integrated pressure regulators. Specification and type testing
气瓶 带有集成压力调节器的气缸阀 规范和型式试验

2013-03-31

现行

ISO 22435-2024

Gas cylinders — Cylinder valves with integrated pressure regulators — Specification and type testing
气瓶.带集成压力调节器的气瓶阀.规范和型式试验

2024-03-21

现行

UNE-EN 911-1996

PLASTICS PIPING SYSTEMS. ELASTOMERIC SEALING RING TYPE JOINTS AND MECHanical joints for thermoplastics pressure piping. Test method for leaktightness under external hydrostatic pressure.
塑料管道系统 热塑性压力管道用弹性密封环式接头和机械接头 外部静水压力下密封性的试验方法

1996-05-10

现行

BS 11/30239906 DC

BS EN 15014. Plastics piping systems. Buried and above ground piping components for water and other liquids under pressure. Requirements and test/assessment methods for pipes and fittings
英国标准EN 15014 塑料管道系统 水和其他受压液体的埋地和地上管道组件 管道和配件的要求和试验/评估方法

2011-03-21

现行

BS 11/30239900 DC

BS EN 15012. Plastics piping systems. Non pressure soil and waste discharge piping components within the building structure. Requirements and test/assessment methods for pipes and fittings
英国标准EN 15012 塑料管道系统 建筑结构内的无压土壤和废水排放管道组件 管道和配件的要求和试验/评估方法

2011-03-21

现行

DIN 16831-5

Pipe fittings and joint assemblies for type PB 125 polybutene pressure pipes - Part 5: General quality requirements and testing
压力管道用聚丁烯（PB）管接头和部件；PB 125.第5部分:一般质量要求、试验

1999-10-01

现行

BS EN ISO 13845-2015

Plastics piping systems. Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes. Test method for leaktightness under internal pressure and with angular deflection
塑料管道系统 与热塑性压力管道一起使用的弹性密封圈型承插接头 内压和角位移下密封性的试验方法

2015-02-28

现行

ISO 13845-2015

Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes — Test method for leaktightness under internal pressure and with angular deflection
塑料管道系统 - 用于未增塑聚氯乙烯（pvc-u）管道的弹性密封环型套筒接头 - 内部压力和角度偏差下的密封性试验方法

2015-02-10

现行

GOST R ISO 13845-2020

Трубопроводы из пластмасс. Раструбные соединения с эластомерным уплотнительным кольцом для напорных труб из термопластов. Метод испытания на герметичность при отрицательном давлении и угловом смещении
塑料管道系统 热塑性压力管用弹性密封环式承插接头 内压和角偏转下密封性的试验方法

现行

DIN EN 911

Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure
塑料管道系统.热塑性压力管道用弹性密封环型接头和机械接头.外部静水压力下密封性的试验方法；德语版本EN 911:1995

1995-09-01

现行

PFI ES42

Standard for Positive Material Identification of Piping Components Using Portable X-Ray Emission Type Test Equipment
使用便携式X射线发射型式试验设备对管道部件进行正材料识别的标准

1996-10-01

现行

DIN 16832-2

Pipe joints and components of chlorinated poly(vinyl chloride) (PVC-C) for pipes under pressure - PVC-C 200 - Part 2: General quality requirements, testing
压力管道用氯化聚氯乙烯（PVC-C）管接头和部件.PVC-C 200.第2部分:一般质量要求和试验

2002-10-01

现行

BS EN ISO 13844-2022

Plastics piping systems. Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes. Test method for leak tightness under negative pressure, angular deflection and deformation
塑料管道系统 与塑料压力管一起使用的弹性密封圈型承插接头 负压、角偏转和变形下密封性的试验方法

2022-05-31

现行

GOST R ISO 13844-2020

Трубопроводы из пластмасс. Раструбные соединения с эластомерным уплотнительным кольцом для напорных труб из пластмасс. Метод испытания на герметичность при отрицательном давлении, угловом смещении и деформации
塑料管道系统 塑料压力管用弹性密封环式承插接头 负向密封性试验方法 压力、角挠度和变形

现行

UNE-EN 1277-2004

Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints
塑料管道系统.埋地非压力应用的热塑性管道系统.弹性密封环型接头密封性的试验方法

2004-09-03

现行

BS EN 803-1995

Plastics piping systems. Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping. Test method for resistance to a short-term internal pressure without end thrust
塑料管道系统 压力管道弹性密封环式接头用注射成型热塑性塑料配件 无端推力的短期内压耐受性试验方法

1995-07-15