Earth-moving machinery. Safety-Requirements for loaders
土方机械 安全
发布日期:
2017-07-13
BS ISO 20474-3:2017给出了ISO 6165中定义的装载机的特定安全要求。这是有意的
与ISO 20474-1一起使用,其中规定了通用的一般安全要求
两个或多个土方机械系列。本文件中给出的具体要求如下:
优先于ISO 20474-1的一般要求。本文件涉及与土方工程相关的所有重大危险、危险情况和事件
按预期或根据要求使用时,其范围内的机械(见ISO 20474-1:2017,附录A)
制造商可合理预见的误用情况。它规定了适当的技术标准
消除或减少相关危害、危险情况或风险的措施
调试、运行和维护期间的事件。本文件不适用于出版日期前制造的机器。交叉引用:ISO 6165:2012 ED6ISO 14397-1:2007 Ed 2ISO 5353:1995(R05)ISO 20474-1:2017ISO 7546:1983(R10)ISO 7131:2009 Ed 3ISO 6016:2008 Ed 3ISO 2330:2002 Ed 3 ISO 14397-2:2007 Ed 2ISO 3449:2005ISO 7096:2000(R05)ISO 13857:2008 Ed 1ISO 3164:2013 ED6ISO 8643:2017ISO 3457:2003 Ed 4ISO 2867:2011 Ed 7ISO 6682:1986ISO 12100:2010 Ed 1购买时可用的所有现行修订均包括在内购买了这份文件。
BS ISO 20474-3:2017 gives the safety requirements specific to loaders as defined in ISO 6165. It is intended
to be used in conjunction with ISO 20474-1, which specifies general safety requirements common to
two or more earth-moving machine families. The specific requirements given in this document take
precedence over the general requirements of ISO 20474-1.This document deals with all significant hazards, hazardous situations and events relevant to the earthmoving
machinery within its scope (see ISO 20474-1:2017, Annex A) when used as intended or under
conditions of misuse reasonably foreseeable by the manufacturer. It specifies the appropriate technical
measures for eliminating or reducing risks arising from relevant hazards, hazardous situations or
events during commissioning, operation and maintenance.This document is not applicable to machines manufactured before the date of its publication.Cross References:ISO 6165:2012 ED6ISO 14397-1:2007 Ed 2ISO 5353:1995 (R05)ISO 20474-1:2017ISO 7546:1983 (R10)ISO 7131:2009 Ed 3ISO 6016:2008 Ed 3ISO 2330:2002 Ed 3 ISO 14397-2:2007 Ed 2ISO 3449:2005ISO 7096:2000 (R05)ISO 13857:2008 Ed 1ISO 3164:2013 ED6ISO 8643:2017ISO 3457:2003 Ed 4ISO 2867:2011 Ed 7ISO 6682:1986ISO 12100:2010 Ed 1All current amendments available at time of purchase are included with the purchase of this document.