BS EN ISO 13473-1:2019-利用表面轮廓表征路面结构-国家数字标准馆

现行 BS EN ISO 13473-1:2019

到馆提醒

收藏跟踪

购买正版

Characterization of pavement texture by use of surface profiles-Determination of mean profile depth 利用表面轮廓表征路面结构

发布日期： 2021-07-06

BS EN ISO 13473-1:2019描述了通过测量表面轮廓并根据该轮廓计算纹理深度来确定路面表面宏观纹理平均深度的试验方法（见第3条）。该技术旨在仅提供路面宏观结构的平均深度值，并被认为对路面微观结构和不平度特征不敏感。交叉引用:GUM:1995 ISO/IEC指南98-3EN 13036-3:2003 ISO/TS 13473-4ISO 5725（所有部分）ISO 13473-5ISO 3274ASTM E1845-
15ISO 4288ISO 4287ISO 13473-2ASTM E2157-15EN 12697-40:2012EN 13036-1:2010ISO 10844:1994（F）ISO 10844:1994ISO 10844:2014购买本文件时提供的所有当前修订版均包含在购买本文件中。

BS EN ISO 13473-1:2019 describes a test method to determine the average depth of pavement surface macrotexture (see Clause 3) by measuring the profile of a surface and calculating the texture depth from this profile. The technique is designed to provide an average depth value of only the pavement macrotexture and is considered insensitive to pavement microtexture and unevenness characteristics.Cross References:GUM:1995ISO/IEC Guide 98-3EN 13036-3:2003ISO/TS 13473-4ISO 5725 (all parts)ISO 13473-5ISO 3274ASTM E1845-15ISO 4288ISO 4287ISO 13473-2ASTM E2157-15EN 12697-40:2012EN 13036-1:2010ISO 10844:1994 (F)ISO 10844:1994ISO 10844:2014All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

BS DD ISO/TS 13473-4-2008

Characterization of pavement texture by use of surface profiles-Spectral analysis of texture profiles
通过使用表面轮廓来表征路面纹理纹理轮廓的光谱分析

BS EN ISO 13473-5-2009

Characterization of pavement texture by use of surface profiles-Determination of megatexture
利用表面轮廓表征路面结构

BS ISO 13473-2-2002

Characterization of pavement texture by use of surface profiles-Terminology and basic requirements related to pavement texture profile analysis
利用表面轮廓表征路面结构

BS PD ISO/PAS 13473-6-2021

Characterization of pavement texture by use of surface profiles-Verification of the performance of laser profilometers used for pavement texture measurements
利用表面轮廓表征路面结构

BS ISO 13473-3-2002

Characterization of pavement texture by use of surface profiles-Specification and classification of profilometers
利用表面轮廓表征路面结构

ISO 13473-2-2002

Characterization of pavement texture by use of surface profiles — Part 2: Terminology and basic requirements related to pavement texture profile analysis
使用表面轮廓表征路面纹理第2部分:与路面纹理轮廓分析相关的术语和基本要求

ISO 13473-5-2009

Characterization of pavement texture by use of surface profiles — Part 5: Determination of megatexture
路面纹理的表面轮廓表征Spart 5:巨纹理的测定

ISO/PAS 13473-6-2021

Characterization of pavement texture by use of surface profiles — Part 6: Verification of the performance of laser profilometers used for pavement texture measurements
用表面轮廓表征路面结构.第6部分:路面结构测量用激光轮廓仪性能的验证

ISO 13473-1-2019

Characterization of pavement texture by use of surface profiles — Part 1: Determination of mean profile depth
使用表面轮廓表征路面纹理 - 第1部分:平均轮廓深度的确定

ISO 13473-3-2002

Characterization of pavement texture by use of surface profiles — Part 3: Specification and classification of profilometers
用表面轮廓仪表征路面结构第3部分:轮廓仪的规范和分类

DIN ISO 13473-2

Characterization of pavement texture by use of surface profiles - Part 2: Terminology and basic requirements related to pavement texture profile analysis (ISO 13473-2:2002)
用表面轮廓表征路面结构第2部分:与路面结构轮廓分析有关的术语和基本要求

ISO 13473-4-2024

Characterization of pavement texture by use of surface profiles — Part 4: One third octave band spectral analysis of surface profiles
用表面轮廓表征路面结构第4部分:表面轮廓的三分之一倍频带光谱分析

DIN ISO/TS 13473-4

Characterization of pavement texture by use of surface profiles - Part 4: Spectral analysis of surface profiles (ISO/TS 13473-4:2008)
用表面轮廓表征路面结构第4部分:表面轮廓的光谱分析

BS ISO 13473-5-2009

Characteristics of pavement texture by use of surface profiles. Determination of megatexture
使用表面轮廓的路面纹理特征巨纹理的测定

DIN EN ISO 13473-1

Characterization of pavement texture by use of surface profiles - Part 1: Determination of mean profile depth (ISO 13473-1:1997)
用表面轮廓表征路面结构.第1部分:平均轮廓深度的测定（ISO 13473-1-1997）；德文版EN ISO 13473-1:2004

UNE-EN ISO 13473-1-2006

Characterization of pavement texture by use of surface profiles - Part 1: Determination of Mean Profile Depth (ISO 13473-1:1997)
用表面轮廓表征路面结构第1部分:平均轮廓深度的测定

DIN EN ISO 13473-5

Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO 13473-5:2009)
用表面轮廓表征路面结构.第5部分:巨结构的测定（ISO 13473-5-2009）

DIN ISO 13473-3

Characterization of pavement texture by use of surface profiles - Part 3: Specifications and classification of profilometers (ISO 13473-3:2002)
用表面轮廓表征路面结构第3部分:轮廓仪的规范和分类

KS B ISO 13565-3(2019 Confirm)

제품의 형상 명세(GPS) — 표면의 결(조직): 프로파일법: 층상 기능 특성을 갖는 표면 — 제3부: 재료 확률 곡선을 이용한 높이 특성
几何产品规格（Gps） - 表面纹理:轮廓方法;具有分层功能特性的曲面 - 第3部分:使用材料概率曲线的高度表征

JIS B 0671-3-2002

Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 3: Height characterization using the material probability curve
产品几何技术规范（GPS）——表面结构:轮廓法；具有分层功能特性的表面第3部分:用材料概率曲线表征高度

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统