BS EN 12312-6:2017规定了将第4条所列危害降至最低的技术要求 在除冰器和除冰器的调试、运行和维护过程中可能会出现这种情况 专门设计用于飞机除冰和清洗的设备，带有除冰/防冰/清洗功能 按预期使用液体，包括制造商合理预见的误用 按照制造商或其授权人员给出的规范进行 代表它还考虑了一些当局认为必不可少的要求， 飞机和地面支持设备（GSE）制造商以及航空公司和地勤机构。注1:本欧洲标准不涉及除冰/防冰操作相关的飞机安全 标准飞机除冰或防冰的任何操作，即使是很小的操作，都会直接影响起飞时的飞行安全。 防止飞行中结冰导致的航空事故主要涉及液体和方法 使用，但在某些情况下也可能涉及除冰或防冰设备的设计或操作。这些 航空方面受适用的民航条例ICAO 9640-AN/940《航空手册》的控制 飞机地面除冰/防冰操作和EASA EU-OPS子部分D 1.345及其可接受的操作方式 符合性（AMC），并包含在ISO 11076:2012（AEA建议）中。这篇文章没有涉及他们 欧洲标准。交叉引用:EN 795:2012EN 1915-1:2013EN 1915- 2:2001年1:2001年1:2001年1:2001年1:2001年1:2001年1:2001年1:2001年1:2001年1:2001年1:2001年1:2001年1:2001年1:2001年1:2001年1:2001年1:2001年1:2001年1:2001年1:2001年1:2001年1:1:2001年1:2001年1:2001年1:1:1:1 1:1 1:1 1:1:1:1 1:1:1:1:1:1:1:1:1:1:1:1:1 1 1 1 1 1:1:1:1:1:1:1:1:1:1:1:1:1:1:1:1 1 1 1 1 1 1 1）1 1 1 1 1 1）1）1:1:1:1:1:1:1:1:1:1:1:1:1:1:1:1:1:1:1:1:1:1:1 1 2011:2013 EN ISO 13732-1ISO 13732-1EN ISO17491-3:2008ISO 17491-3:2008ISO 6966-2:2014ISO 11075:2007ISO 11077:2014ISO 11078:2007AHM 975AHM 977IC AO 9640- AN/940SAE/ARP 1971CSAE/ARP 5058 SAE AMS 1424SAE AMS 1428购买本文件时提供的所有当前修订版均包含在购买本文件中。

BS EN 12312-6:2017 specifies the technical requirements to minimize the hazards listed in Clause 4 which can arise during the commissioning, the operation and the maintenance of deicers and equipment designed exclusively for de-icing and washing of aircraft with de-icing/anti-icing/washing liquids when used as intended, including misuse reasonably foreseeable by the manufacturer, when carried out in accordance with the specifications given by the manufacturer or his authorized representative. It also takes into account some requirements recognized as essential by authorities, aircraft and ground support equipment (GSE) manufacturers as well as airlines and handling agencies.NOTE 1 Safety of aircraft in connection with de-icing/anti-icing operations is not dealt with in this European Standard. Any, even minor, aircraft de-icing or anti-icing operation directly affects flight safety on take-off. Prevention of aeronautical accidents resulting from in-flight icing principally concerns the fluids and methods used, but it may in certain cases also concern de-icing or anti-icing equipment design or operation. These aeronautical aspects are controlled by the applicable Civil Aviation regulations ICAO 9640-AN/940,Manual of aircraft ground de-icing/anti-icing operationsand EASA EU-OPS Subpart D 1.345 and its Acceptable Means of Compliance (AMC) and covered in ISO 11076:2012 (AEA Recommendations). They are not covered in this European Standard.Cross References:EN 795:2012EN 1915-1:2013EN 1915-2:2001+A1:2009EN 1915-3EN 1915-4EN ISO 12100:2010ISO 12100:2010EN ISO 13732-1ISO 13732-1EN ISO 13849-1:2015ISO 13849-1:2015EN ISO 13850:2015ISO 13850:2015ISO 4305ISO 11076:2012DIN 51130:20142006/42/ECEN 143:2000EN 149:2001+A1:2009EN 280:2013+A1:2013EN 779:2012EN 1777EN 1822-1:2009EN 13034:2005+A1:2009EN 14387:2004+A1:2008EN ISO 13688:2013ISO 13688:2013EN ISO 13732-1ISO 13732-1EN ISO 17491-3:2008ISO 17491-3:2008ISO 6966-2:2014ISO 11075:2007ISO 11077:2014ISO 11078:2007AHM 975AHM 977IC AO 9640-AN/940SAE/ARP 1971CSAE/ARP 5058SAE AMS 1424SAE AMS 1428All current amendments available at time of purchase are included with the purchase of this document.