BS EN 14307:2015规定了工厂制挤塑聚苯乙烯泡沫的要求 用于建筑设备和工业装置隔热的产品 在工作温度约为-180°C至+75°C的范围内。低于-50°C的工作温度时，进行有关材料在环境中适用性的特殊试验 建议使用预期用途（例如氧气液化）。应注意制造商的建议 在所有情况下。这些产品以贴面或未贴面的板材、管段、管段和管道的形式制造 预制件。本欧洲标准描述了产品特性，包括测试程序， 合格性、标记和评价。本标准涵盖的产品也用于预制隔热系统和 复合板；不包括包含这些产品的系统的性能。本欧洲标准未规定应达到的给定财产的要求水平 通过一种产品来证明其在特定应用中的适用性。测试所需的水平 给定的应用可以在法规和招标书中找到。在平均温度为0℃时，宣称导热系数大于0060 W/（m·K）的产品 本标准不包括10°C。本欧洲标准不包括拟用于建筑物隔热的产品 结构也不用于隔音。交叉引用:EN 822EN 823EN 824EN 826EN 1094-6ISO 2477:1987EN 1604EN 1609EN 12085EN 12086EN 12667EN 12939EN 13172EN 13467EN 13469EN 13472EN 13501-1:2007+A1:2009EN 13639EN 13820EN 13823AEN 15715:2009EN ISO 1182ISO 1182ISO 1716EN ISO 8497ISO 8497EN ISO 8894ISO 8894-1EN ISO 9229:2007EN ISO 11925-2ISO 13787EN 1607EN ISO 11925-24590ISO 4590EN 12087EN 12088EN 12089EN 12090EN 12091EN 13238EN 13470EN 13471EN 13793EN 14707EN ISO 1182ISO 1182EN ISO 1716ISO 1716第305/2011号法规（欧盟）购买本文件时提供的所有现行修订均包括在内。

BS EN 14307:2015 specifies the requirements for factory made extruded polystyrene foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately - 180 °C to + 75 °C.Below an operating temperature of - 50 °C, special tests regarding the suitability of the material in the intended application are advised (e.g. liquefaction of oxygen). Manufacturer's advice should be heeded in all cases.The products are manufactured in the form of faced or unfaced boards, pipe sections, segments and prefabricated ware.This European Standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.Products covered by this standard are also used in prefabricated thermal insulating systems and composite panels; the performance of systems incorporating these products is not covered.This European Standard does not specify the required level of a given property that should be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender.Products with a declared thermal conductivity greater than 0,060 W/(m·K) at a mean temperature of 10 °C are not covered by this standard.This European Standard does not cover products intended to be used for the insulation of the building structure nor for acoustical insulation.Cross References:EN 822EN 823EN 824EN 825EN 826EN 1094-6ISO 2477:1987EN 1604EN 1609EN 12085EN 12086EN 12667EN 12939EN 13172EN 13467EN 13468EN 13469EN 13472EN 13501-1:2007+A1:2009EN 13639EN 13820EN 13823EN 15715:2009EN ISO 1182ISO 1182EN ISO 1716ISO 1716EN ISO 8497ISO 8497EN ISO 8894ISO 8894-1EN ISO 9229:2007ISO 9229:2007EN ISO 11925-2ISO 11925-2EN ISO 13787ISO 13787EN 1602EN 1606EN 1607EN ISO 4590ISO 4590EN 12087EN 12088EN 12089EN 12090EN 12091EN 13238EN 13470EN 13471EN 13472EN 13793EN 14707EN ISO 1182ISO 1182EN ISO 1716ISO 1716Regulation (EU) No. 305/2011All current amendments available at time of purchase are included with the purchase of this document.