1.1 这种做法通过以公认的术语指定图像数据传输和档案存储，促进了热成像和数据采集设备的互操作性。本文件旨在与实践结合使用 E2339 .实践 E2339 定义了NEMA标准出版物《医学数字成像和通信》（DICOM，见http://medical.nema.org)，图像数据采集、审查、存储和档案存储的国际标准。实践的目标 E2339 通常称为DICONDE，旨在提供一种标准，便于在符合DICONDE标准的任何系统上显示和分析NDE结果。为此，练习 E2339 提供了一个数据字典和一组适用于所有无损检测模式的信息模块。 本规程是对规程的补充 E2339 通过提供特定于热成像测试方法的信息对象定义、信息模块和数据字典。 1.2 开发这种做法是为了克服使用专有数据传输和存储方法分析或归档热成像/红外测试设备数据时出现的问题。随着数字技术的发展，数据必须使用开放的、全行业的数据传输和档案存储方法保持可破译性。该实践定义了一种方法，其中所有热成像技术参数和检查数据都以标准方式进行通信和存储，而不管数字技术的变化。 1.3 这种做法没有规定: 1.3.1 评估实现是否符合标准的测试或验证程序， 1.3.2 声称符合标准的设备上标准任何功能的实现细节，或 1.3.3 通过集成一组声称符合DICONDE标准的设备来实现的系统所应具备的全部特性和功能。 1.4 单位-- 虽然这种做法不包含需要单位的值，但它确实描述了存储和通信数据的方法，这些方法确实需要正确解释单位。对于大多数属性，以国际单位表示的值被视为标准值。然而，对于在整个行业中并不总是使用国际单位制表示的选定属性，则有一个例外。 1.5 本标准并不旨在解决与其使用相关的所有安全问题（如果有的话）。本标准的使用者有责任在使用前建立适当的安全、健康和环境实践，并确定监管限制的适用性。 1.6 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。 =====意义和用途====== 5.1 负责创建、传输和存储热成像无损检测结果的人员将使用本标准。本练习定义了一组信息模块，这些模块与练习一起 E2339 DICOM标准提供了一种组织热成像测试参数和结果的标准方法。热成像检查结果可以在符合文件的任何设备上显示或分析，以帮助他们解码和显示符合DICONDE标准的检查记录中包含的数据。

1.1 This practice facilitates the interoperability of thermographic imaging and data acquisition equipment by specifying the image data transfer and archival storage in commonly accepted terms. This document is intended to be used in conjunction with Practice E2339 . Practice E2339 defines an industrial adaptation of the NEMA Standards Publication titled Digital Imaging and Communications in Medicine (DICOM, see http://medical.nema.org), an international standard for image data acquisition, review, storage, and archival storage. The goal of Practice E2339 , commonly referred to as DICONDE, is to provide a standard that facilitates the display and analysis of NDE results on any system conforming to the DICONDE standard. Toward that end, Practice E2339 provides a data dictionary and a set of information modules that are applicable to all NDE modalities. This practice supplements Practice E2339 by providing information object definitions, information modules, and a data dictionary that are specific to thermographic test methods. 1.2 This practice has been developed to overcome the issues that arise when analyzing or archiving data from thermography/infrared test equipment using proprietary data transfer and storage methods. As digital technologies evolve, data must remain decipherable using open, industry-wide methods for data transfer and archival storage. This practice defines a method where all the thermography technique parameters and inspection data are communicated and stored in a standard manner regardless of changes in digital technology. 1.3 This practice does not specify: 1.3.1 A testing or validation procedure to assess an implementation’s conformance to the standard, 1.3.2 The implementation details of any features of the standard on a device claiming conformance, or 1.3.3 The overall set of features and functions to be expected from a system implemented by integrating a group of devices each claiming DICONDE conformance. 1.4 Units— Although this practice contains no values that require units, it does describe methods to store and communicate data that do require units to be properly interpreted. For most attributes, the values stated in SI units are considered standard. However, an exception was made for select attributes that are not always expressed using SI units across the industry. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 Personnel that are responsible for the creation, transfer, and storage of thermographic NDE test results will use this standard. This practice defines a set of information modules that, along with Practice E2339 and the DICOM standard, provide a standard means to organize thermographic test parameters and results. The thermographic examination results may be displayed or analyzed on any device that conforms to the document to help them decode and display the data contained in the DICONDE compliant inspection record.