本文件规定了试样的几何形状和单板厚度为4.5mm的单搭接试样上单机械接头机械剥离试验的试验程序。 本文件中使用的术语“板材”包括挤压件和铸造材料。 机械化剥离试验的目的是确定采用不同连接方法制成的接头的机械特性和失效模式。 本文件不适用于其他应用标准涵盖的土木工程应用，如金属建筑和钢结构。 注:电阻点焊、缝焊和凸焊的机械剥离试验，见ISO 14270

This document specifies the geometry of test specimens and the testing procedure for mechanized peel testing of single mechanical joints on single-lap test specimens up to a single sheet thickness of 4,5 mm. The term "sheet", as used in this document, includes extrusions and cast materials. The purpose of the mechanized peel tests is to determine the mechanical characteristics and the failure modes of the joints made with different joining methods. This document does not apply to civil engineering applications such as metal buildings and steel constructions which are covered by other application standards. NOTE For mechanized peel testing of resistance spot, seam and embossed projection welds, see ISO 14270