首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 BS 5350-H3:1984
到馆阅读
收藏跟踪
购买正版
Methods of test for adhesives. Physical tests on hot-melt adhesives-Determination of heat resistance of hot-melt adhesives 胶粘剂的试验方法 热熔胶的物理试验
发布日期: 1984-02-29
描述了一种确定搭接接头在恒定剪切下失效温度的程序。交叉引用:ASTM D 2482
Describes a procedure for determining temperature at which a lap joint fails under constant shear.Cross References:ASTM D 2482
分类信息
发布单位或类别: 英国-英国标准学会
关联关系
研制信息
相似标准/计划/法规
现行
BS 5350-H4-1984
Methods of test for adhesives. Physical tests on hot-melt adhesives-Determination of maximum open time of hot-melt adhesives (oven method)
胶粘剂的试验方法 热熔胶的物理试验
1984-02-29
现行
JIS K 6862-1984
Testing methods for melt viscosity of hot-melt adhesives
热熔胶熔体粘度的试验方法
1984-01-01
现行
HG/T 3660-1999
热熔胶粘剂熔融粘度的测定
Testing Methods for Melt Viscosity of Hot-melt Adhesives
1999-06-16
现行
BS 5350-H2-1982
Methods of test for adhesives. Physical tests on hot-melt adhesives-Determination of low temperature flexibility or cold crack temperature
胶粘剂的试验方法 热熔粘合剂的物理试验 低温柔韧性或冷裂纹温度的测定
1982-12-31
现行
BS 5350-H1-1981
Methods of test for adhesives-Determination of heat stability of hot melt adhesives in the application equipment
胶粘剂的试验方法 应用设备中热熔胶热稳定性的测定
1981-07-31
现行
CY/T 40-2007
书刊装订用EVA型热熔胶使用要求及检测方法
The instruction and testing methods of EVA hot-melt adhesives for bookbinding
2007-02-26
现行
ASTM D3236-15(2021)
Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials
热熔胶和涂料的表观粘度的标准测试方法
2021-01-01
现行
BS 5131-1.3-1991
Methods of test for footwear and footwear materials. Adhesives-Preparation of test assemblies using adhesives (other than hot melt adhesives) for heat resistance (creep) and peel tests
鞋类和鞋类材料的试验方法 粘合剂
1991-02-28
现行
BS 5131-1.7-1991
Methods of test for footwear and footwear materials. Adhesives-Preparation of test assemblies using hot melt adhesives for heat resistance (creep) and peel tests
鞋类和鞋类材料的试验方法 粘合剂
1991-07-31
现行
BS 5131-1.8-1981
Methods of test for footwear and footwear materials. Adhesives-Rate of bond strength development in shear of hot melt adhesives for lasting
鞋类和鞋类材料的试验方法 粘合剂
1981-08-31
现行
ASTM D3111-19
Standard Practice for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test
用Mandrel Bend Test测定热熔胶的挠性的标准实施规程
2019-04-01
现行
ASTM D5100/D5100M-95a(2024)
Standard Test Method for Adhesion of Mineral Aggregate to Hot Bitumen
矿物集料与热沥青附着力的标准试验方法
2024-07-01
现行
GB/T 27934.4-2011
纸质印刷品覆膜过程控制及检测方法 第4部分:反应型聚氨酯(PUR)热熔胶即涂覆膜
Lamination process control and testing methods for paper prints - Part 4: Lamination with polyurethane reactive hot melt adhesive
2011-12-30
现行
AS 2331.4.1-2001
Methods of test for metallic and related coatings, Method 4.1: Physical tests - Qualitative adhesion tests
金属和相关涂层的试验方法 方法4.1:物理试验-定性附着力试验
2001-11-23
现行
BS 1203-2001
Hot-setting phenolic and aminoplastic wood adhesives. Classification and test method
热固化酚醛和氨基塑料木材粘合剂 分类和试验方法
2001-11-15
现行
BS 903-A27-1986
Physical testing of rubber-Determination of rubber to fabric adhesion. Direct tension method
橡胶的物理测试 橡胶与织物附着力的测定 直接拉伸法
1986-02-28
现行
UNE-EN 12697-37-2003
Bituminous mixtures - Test methods for hot mix asphalt - Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA
沥青混合料.热拌沥青的试验方法.第37部分:HRA用预涂层碎屑上粘合剂粘附性的热砂试验
2003-11-28
现行
BS EN 13880-10-2018
Hot applied joint sealants-Test method for the determination of adhesion and cohesion following continuous extension and compression
热涂接缝密封剂 连续拉伸和压缩后附着力和内聚力测定的试验方法
2018-06-12
现行
AS 2313.2.4-2005
Methods of test for single sided and double sided pressure-sensitive adhesive tape, Method 2.4: Physical properties - Thickness
单面和双面压敏胶带的试验方法 方法2.4:物理性能-厚度
2005-10-28
现行
AS 2313.2.2-2005
Methods of test for single sided and double sided pressure-sensitive adhesion tape, Method 2.2: Physical properties - Elongation
单面和双面压敏胶带的试验方法 方法2.2:物理性能-伸长率
2005-10-28