首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 SAE ARP922B
到馆提醒
收藏跟踪
购买正版
Electroluminescence, Design Criteria and Recommendations for Use in Aerospace Vehicle Crew Station Areas (Stabilized: Feb 2012) 航空航天飞行器乘员站区域用电致发光、设计标准和建议(稳定:2012年2月)
发布日期: 2012-02-09
本文件已被宣布为“稳定”,不再接受货币定期审查。用户负责验证参考资料和持续适用性或技术要求。新技术可能存在。本ARP的范围是提供航空航天飞行器乘员站区域仪表和控制面板电致发光应用的一般要求。本ARP中规定的设计亮度和颜色建议适用于乘员站在仪表和控制面板中多次使用电致发光的情况,以及可能涉及不同制造商的情况。 这些建议也可能有助于结合电致发光的单独使用的显示器的设计,然而,通过制造和操作参数的变化,该光源具有广泛的设计通用性,本文将不陈述许多可接受的设计建议。在本文中,电致发光将被称为EL。
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.The scope of this ARP is to provide general requirements for application of electroluminescence to Aerospace Vehicle Crew Station Area instruments and control panels. The design brightness and color recommendations stated in this ARP are intended to apply where a crew station has multiple usage of electroluminescence in both instruments and control panels and when different manufacturers may be involved. These recommendations may also be helpful for the design of individually used displays incorporating electroluminescence, however, this light source has extensive design versatility through variance of manufacturing and operating parameters and the numerous acceptable design recommendations will not be stated herein. Electroluminescence will herein be referred to as EL.
分类信息
关联关系
研制信息
相似标准/计划/法规
现行
GB/T 21429-2008
户外和户内电气设备用空心复合绝缘子 定义、试验方法、接收准则和设计推荐
Composite insulators - Hollow insulators for use in outdoor and indoor electrical equipment - Definitions, test methods, acceptance criteria and design recommendations
2008-01-22
现行
KS C IEC 61462
복합 중공형 애자 — 정격 전압 1 000 V를 초과하는 전력기기용 가압 및 비가압형 애자 — 정의, 시험방법, 허용 기준 및설계 권고사항
复合空心绝缘子 - 用于额定电压大于1 000 V的电气设备的加压和无压绝缘子 - 定义 试验方法 验收标准和设计建议
2018-03-23
现行
KS C IEC 61462(2023 Confirm)
복합 중공형 애자 — 정격 전압 1 000 V를 초과하는 전력기기용 가압 및 비가압형 애자 — 정의, 시험방법, 허용 기준 및설계 권고사항
复合空心绝缘子.额定电压大于1000V的电气设备用加压和非加压绝缘子.定义、试验方法、验收标准和设计建议
2018-03-23
现行
UNE-EN 61462-2008
Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations.
复合空心绝缘子.额定电压大于1000V的电气设备用加压和非加压绝缘子.定义 试验方法 验收标准和设计建议
2008-12-03
现行
IEC 61462-2023
Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with AC rated voltage greater than 1 000 V AC and D.C. voltage greater than 1500V - Definitions, test methods, acceptance criteria and design recommendations
复合空心绝缘子.交流额定电压大于1000V交流和直流电压大于1500V电气设备用加压和非加压绝缘子.定义、试验方法、验收标准和设计建议
2023-09-06
现行
DIN EN 61462
Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1000 V - Definitions, test methods, acceptance criteria and design recommendations (IEC 61462:2007); German version EN 61462:2007
复合空心绝缘子.额定电压大于1000V的电气设备用加压和非加压绝缘子.定义 试验方法 验收标准和设计建议(IEC 61462-2007);德文版EN 61462:2007
2008-06-01
现行
DIN EN IEC 61462-DRAFT
Draft Document - Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations (IEC 36/509/CD:2021); Text in German and English
文件草案——复合空心绝缘子——额定电压大于1000V的电气设备用加压和非加压绝缘子——定义、试验方法、验收标准和设计建议(IEC 36/509/CD:2021);德语和英语文本
2021-12-01
现行
DIN EN 61462-DRAFT
Draft Document - Composite insulators - Hollow pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1000 V - Definitions, test methods, acceptance criteria and design recommendations (IEC 36C/158/CDV:2005); German version prEN 61462:2005
文件草案——复合绝缘子——额定电压大于1000V的电气设备用空心加压和非加压绝缘子——定义、试验方法、验收标准和设计建议(IEC 36C/158/CDV:2005);德文版prEN 61462:2005
2005-12-01