首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 IEC 61076-8-108:2023
到馆阅读
收藏跟踪
购买正版
Connectors for electrical and electronic equipment - Product requirements - Part 8-108: Power connectors - Detail specification for 2P 250 A, 1 000 V plus 2P 5 A 50 V rectangular housing shielded connectors with IP65/IP68 degree of protection when mated and locked, and IPXXB when unmated 电气和电子设备用连接器.产品要求.第8-108部分:电源连接器.2P 250 A 1000 V加2P 5 A 50 V矩形外壳屏蔽连接器的详细规范 当配合和锁定时防护等级为IP65/IP68 当未配合时防护等级IPXXB
发布日期: 2023-05-03
IEC 61076-8-108:2023描述了自由和固定矩形连接器,具有: -2P电源加2P信号触点; -带锁定杆和四种可能编码的塑料外壳; -250 A额定电流,电源部分1000V DC额定电压; -信号部分上的5A额定电流、50V DC额定电压; -利用相关的屏蔽终端在每个电源触点周围进行单独屏蔽; -配合和锁定时防护等级为IP65/IP68,未配合时插头和插座部件均为IPXXB,以下简称连接器,用于电气和电子设备,包括外形尺寸、接口尺寸、技术特性、性能要求和试验方法。
IEC 61076-8-108:2023 describes free and fixed rectangular connectors with:
- 2P power plus 2P signal contacts;
- plastic housing with locking lever and four possible codings;
- 250 A rated current, 1 000 V DC rated voltage on the power section;
- 5 A rated current, 50 V DC rated voltage on the signal section;
- individual shielding around each power contact with relevant shielding termination;
- IP65/IP68 degree of protection when mated and locked, and IPXXB on both plug and receptacle parts when unmated, hereinafter referred to as a connector, for use in electrical and electronic equipment, including overall dimensions, interface dimensions, technical characteristics, performance requirements and test methods.
分类信息
关联关系
研制信息
归口单位: TC 48/SC 48B
相似标准/计划/法规
现行
BS EN 61076-2-2011
Connectors for electronic equipment. Product requirements-Sectional specification for circular connectors
电子设备用连接器 产品要求
2011-08-31
现行
BS EN 61076-1-2006+A1-2019
Connectors for electronic equipment. Product requirements-Generic specification
电子设备用连接器 产品要求
2019-07-15
现行
BS EN 61076-3-001-2008
Connectors for electronic equipment. Product requirements-Rectangular connectors. Blank detail specification
电子设备用连接器 产品要求
2009-02-28
现行
BS EN 61076-2-001-2011
Connectors for electronic equipment. Product requirements-Circular connectors. Blank detail specification
电子设备用连接器 产品要求
2011-08-31
现行
BS EN 60512-10-4-2003
Connectors for electronic equipment. Tests and measurements-Test 10d. Electrical overload (connectors)
电子设备用连接器 测试和测量
2003-11-13
现行
IEC 61076-2-111-2017
Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking
电气和电子设备用连接器.产品要求.第2-111部分:圆形连接器.带M12螺钉锁紧的电源连接器详细规范
2017-12-07
现行
BS EN IEC 60512-1-2018
Connectors for electrical and electronic equipment. Tests and measurements-Generic specification
电气和电子设备用连接器 测试和测量
2018-12-06
现行
IEC 61076-3-2008
Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification
电子设备连接器 - 产品要求 - 第3部分:矩形连接器 - 分段规格
2008-07-09
现行
IEC 61076-2-2011
Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors
电子设备用连接器 产品要求 第2部分:圆形连接器的分规范
2011-06-21
现行
BS EN 61076-2-101-2012
Connectors for electronic equipment. Product requirements-Circular connectors. Detail specification for M12 connectors with screw-locking
电子设备用连接器 产品要求
2012-08-31
现行
BS EN 61076-2-105-2008
Connectors for electronic equipment. Product requirements-Circular connectors. Detail specification for M5 connectors with screw-locking
电子设备用连接器 产品要求
2009-03-31
现行
BS PD IEC/PAS 61076-3-126-2018
Connectors for electrical and electronic equipment. Product requirements-Rectangular connectors - Detail specification for 5 pole power connector for industrial environments with push-pull locking
电气和电子设备用连接器 产品要求 矩形连接器.带推拉锁定的工业环境用5极电源连接器详细规范
2018-02-28
现行
BS EN 61076-2-107-2010
Connectors for electronic equipment. Product requirements-Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking
电子设备用连接器 产品要求
2010-07-31
现行
IEC 61076-1-2006
Connectors for electronic equipment - Product requirements - Part 1: Generic specification
电子设备连接器 - 产品要求 - 第1部分:通用规范
2006-04-27
现行
IEC 61076-1-2006+AMD1-2019 CSV
Connectors for electronic equipment - Product requirements - Part 1: Generic specification
电子设备用连接器.产品要求.第1部分:总规范
2019-01-11
现行
IEC 61076-3-001-2008
Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification
电子设备用连接器 产品要求 第3-001部分:矩形连接器 空白详细规范
2008-07-09
现行
IEC 61076-2-001-2011
Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification
电子设备连接器 - 第2-001部分:圆形连接器 - 空白详细规格
2011-06-21
现行
IEC 60512-1-2018 RLV
Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification
电气和电子设备用连接器.试验和测量.第1部分:总规范
2018-10-22
现行
IEC 60512-1-2018
Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification
电气和电子设备用连接器试验和测量第1部分:总规范
2018-10-22
现行
IEC 61076-3-126-2023
Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5-way power connectors for industrial environments with push-pull locking
电气和电子设备用连接器.产品要求.第3-126部分:矩形连接器.具有推拉锁定的工业环境用5路电源连接器的详细规范
2023-01-31