本文件规定了一种测定具有互连空隙的沥青混合料圆柱形试样垂直和水平渗透性的方法。本文件适用于从道路取芯的试样、实验室制备的混凝土板试样或用压实装置制备的实验室试样，前提是试样厚度不小于混合料中骨料标称最大粒径的两倍。试样的标称直径应为100 mm或150 mm，除非骨料的标称最大粒径超过22 mm（当标称直径为150 mm时）。 交叉引用:EN 12697-29购买本文件时可获得的所有现行修订均包含在购买本文件中。

This document specifies a method for determining the vertical and horizontal permeability of cylindrical specimens of bituminous mixtures with interconnecting voids. The document applies to specimens cored out of the road, specimens from laboratory made slabs or laboratory specimens prepared with a compaction device provided the thickness of the specimen is not less than twice the nominal maximum particle size of the aggregate in the mixture. The nominal diameter of specimens should be either 100 mm or 150 mm unless the nominal maximum particle size of the aggregate size exceeds 22 mm, when the nominal diameter is 150 mm.Cross References:EN 12697-29All current amendments available at time of purchase are included with the purchase of this document.