1.1 本规范涵盖了连续纤维和短纤维玻璃绞线的要求，包括单股、合股和多股。它还包括有纹理的玻璃纤维纱线。本规范旨在通过指定玻璃纤维行业中通常制造的绞线产品的通用名称来帮助最终用户。 1.2 生产具有各种组成的玻璃纤维。一般应用程序通过字母指定的方式进行识别。字母名称代表在预期应用中为最终用户提供可接受性能的眼镜系列。例如，本规范中E-Glass的成分限制，代表一般和大多数电气应用的玻璃纤维系列，由字母指定 E 军用规范，如MIL-R-60346，承认本规范中所述的成分限制符合增强塑料结构应用中使用的E-玻璃绞线的相应要求。 1.3 玻璃纤维股在特定条件下具有多种通用用途，例如高物理或化学应力、高湿度、高温或电气环境。特定条件下的财产要求由买方和供应商商定。电气性能要求因具体的最终用途而异。对于印刷电路板应用，可能需要其他要求，例如使用电子电路互连和封装协会（IPC）规范EG 4412 A，用于由E编织的成品织物- 印刷电路板用玻璃，或适用于玻璃纤维基底的印刷线路板规范MIL-P-13949。 1.4 以国际单位制或英寸磅单位表示的数值应单独视为标准。每个系统中规定的数值并非完全相等；因此，每个系统应独立使用。将两个系统中的值合并将导致不符合标准。 1.5 本规范是军用规范的替代品系列之一:MIL-Y-1140纱线、帘线、套管、布和胶带玻璃；和MIL-C-9084布，树脂层压板用玻璃饰面。 1.6 本系列中的其他ASTM规范已经起草完毕，并出现在 ASTM标准年鉴 这些包括成品玻璃织物、未加工玻璃纤维织物、玻璃胶带、玻璃套管、玻璃帘线、玻璃缝纫线和由成品玻璃织品制成的成品层压板。 1.7 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.8 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。

1.1 This specification covers the requirements for continuous fiber and staple fiber glass strands, including single, plied and multiple wound. It also covers textured glass fiber yarns. This specification is intended to assist ultimate users by designating the general nomenclature for the strand products that are generally manufactured in the glass fiber industry. 1.2 Glass fibers are produced having various compositions. General applications are identified by means of a letter designation. The letter designation represents a family of glasses that have provided acceptable performance to the end-user in the intended application. For example, the composition limits stated for E-Glass in this specification representing the glass fiber family for general and most electrical applications is designated by the letter E . Military specifications, such as, MIL-R-60346, recognize the composition limits described in this specification as meeting the respective requirements for E-Glass strands used in reinforced plastic structure applications. 1.3 Glass fiber strands have a variety of general uses under specific conditions, such as high physical or chemical stress, high moisture, high temperature, or electrical environments. Property requirements under specific conditions are agreed upon between the purchaser and the supplier. Electrical property requirements vary with specific end-use applications. For printed circuit board applications, other requirements may be needed such as the use of Institute for Interconnecting and Packaging Electronic Circuits (IPC) Specification EG 4412 A for finished fabric woven from E-Glass for printed circuit boards, or Specification MIL-P-13949 for printed wiring boards applicable to glass fabric base. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems will result in non-conformance with the standard. 1.5 This specification is one of a series to provide a substitute for Military Specifications: MIL-Y-1140 Yarn, Cord, Sleeving, Cloth and Tape-Glass; and MIL-C-9084 Cloth, Glass Finished for Resin Laminates. 1.6 Additional ASTM specifications in this series have been drafted and appear in current editions of the Annual Book of ASTM Standards . These include finished glass fabrics, unfinished glass fabrics, glass tapes, glass sleevings, glass cords, glass sewing threads, and finished laminates made from finished glass fabrics. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.