本文件规定了在进行电弧焊接的工作场所使用的透明焊接幕、带和屏幕的安全要求。它们旨在为在电弧焊接过程附近但不参与焊接本身的工人提供保护，使其免受有害水平的光辐射和飞溅。它们旨在减少来自电弧的不适眩光，但也允许足够的透光率，以允许观察后面的工作空间。 透明焊接幕也可以用于其他应用，只要紫外线和蓝光发射量小于电弧焊接，并且透射的红外辐照度低于适用的暴露极限。它们被设计为在距离电弧至少1m的距离处使用。 本文件中规定的焊接幕、带和筛网不用于更换焊接过滤器。 有意观察焊接电弧时，可使用其他保护手段，参见ISO 16321-1和ISO 16321-2。 本文件不适用于ISO 19818-1适用的激光辐射防护。

This document specifies safety requirements for transparent welding curtains, strips and screens to be used in workplaces where arc welding is taking place. They are intended to provide protection against harmful levels of optical radiation and spatter for workers who are in the vicinity of arc welding processes but not involved in the welding itself. They are intended to reduce the discomfort glare from the arc but also allow sufficient luminous transmittance to permit a view into the workspace behind. The transparent welding curtains can also be used in other applications as long as the UV- and blue-light emissions are less than in arc welding and the transmitted infrared irradiance is below applicable exposure limits. They are designed to be used at a distance from the arc of at least 1 m. Welding curtains, strips and screens specified in this document are not intended to replace welding filters. For intentional viewing of welding arcs, other means of protection are used, see ISO 16321-1 and ISO 16321-2. This document is not applicable to protection against laser radiation, for which ISO 19818-1 applies.