IEC 61000-4-15:20 10给出了闪烁测量设备的功能和设计规范，旨在指示所有实际电压波动波形的正确闪烁感知水平。提供信息以使得能够构建这样的仪器。根据符合该标准的闪烁仪的输出，给出了一种评估闪烁严重程度的方法。IEC 61000本部分中的闪烁计规范仅涉及120 V和230 V、50 Hz和60 Hz输入的测量。一些白炽灯用于其他电压的特性与表1和表2中的值足够相似，使得校正因子的使用可以应用于那些其他电压。附件B提供了其中一些修正系数。除了上面给出的电压和频率的详细规格仍在考虑中。IEC 61000这一部分的目的是为模拟或数字闪烁测量设备的设计和仪器提供基本信息。它没有给出闪烁严重程度的容差极限值。本第二版取消并取代1997年出版的第一版及其修正案1（2003），构成技术修订。特别是，这个新版本增加或澄清了几个直接测量参数的定义，以避免不同的解释。根据IEC指南107，它具有基本EMC出版物的地位。 新的！IEC 61000-4-15:20 10也可作为IEC标准+61000-4-15:20 10提供，其中包含国际标准及其红线版本，显示了与前一版本相比技术内容的所有变化。 2012年3月更正的内容已纳入本副本。

IEC 61000-4-15:2010 gives a functional and design specification for flicker measuring apparatus intended to indicate the correct flicker perception level for all practical voltage fluctuation waveforms. Information is presented to enable such an instrument to be constructed. A method is given for the evaluation of flicker severity on the basis of the output of flickermeters complying with this standard. The flickermeter specifications in this part of IEC 61000 relate only to measurements of 120 V and 230 V, 50 Hz and 60 Hz inputs. Characteristics of some incandescent lamps for other voltages are sufficiently similar to the values in Table 1 and Table 2, that the use of a correction factor can be applied for those other voltages. Some of these correction factors are provided in the Annex B. Detailed specifications for voltages and frequencies other than those given above, remain under consideration. The object of this part of IEC 61000 is to provide basic information for the design and the instrumentation of an analogue or digital flicker measuring apparatus. It does not give tolerance limit values of flicker severity. This second edition cancels and replaces the first edition published in 1997 and its Amendment 1 (2003) and constitutes a technical revision. This new edition, in particular, adds or clarifies the definition of several directly measured parameters, so that diverging interpretations are avoided. It has the status of a basic EMC publication in accordance with IEC Guide 107.
NEW! IEC 61000-4-15:2010 is also available as IEC Standards+ 61000-4-15:2010 which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. The contents of the corrigendum of March 2012 have been included in this copy.