首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ASTM C332-23
到馆提醒
收藏跟踪
购买正版
Standard Specification for Lightweight Aggregates for Insulating Concrete 绝缘混凝土用轻质集料的标准规范
发布日期: 2023-06-01
1.1 本规范涵盖了用于不受天气影响的混凝土的轻质骨料,其中主要考虑的是所得混凝土的隔热性能。 1.2 本标准的文本引用了提供解释性材料的注释和脚注。这些注释和脚注(不包括表和图中的注释和脚注)不应被视为本标准的要求。 1.3 关于通过使用试验筛确定的筛网尺寸和骨料尺寸,为了方便用户,以英寸-磅为单位显示了数值; 但是,括号中显示的标准筛网名称是规范中规定的标准值 E11 。 1.3.1 关于其他计量单位,以英寸磅单位表示的数值应视为标准。括号中给出的值是国际单位制的数学转换,仅供参考,不被视为标准。 1.4 以下注意事项仅适用于试验方法部分,第节 7. ,规格: 本标准并非旨在解决与其使用相关的所有安全问题(如有)。 本标准的使用者有责任在使用前制定适当的安全、健康和环境实践,并确定监管限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。
1.1 This specification covers lightweight aggregates intended for use in concrete not exposed to the weather, in which the prime consideration is the thermal insulating property of the resulting concrete. 1.2 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.3 With regard to sieve size and the size of aggregate as determined by the use of testing sieves, the values in inch-pound units are shown for the convenience of the user; however, the standard sieve designation shown in parentheses is the standard value as stated in Specification E11 . 1.3.1 With regard to other units of measure, the values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 The following precautionary caveat pertains only to the test method portion, Section 7 , of the specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
分类信息
关联关系
研制信息
归口单位: C09.21
相似标准/计划/法规
现行
JG/T 435-2014
无机轻集料防火保温板通用技术要求
General specification of inorganic lightweight aggregate board for fireproof and insulation
2014-07-14
现行
ASTM C330/C330M-23
Standard Specification for Lightweight Aggregates for Structural Concrete
结构混凝土用轻骨料标准规范
2023-06-01
现行
JGJ/T 253-2019
无机轻集料砂浆保温系统技术标准
Technical standard for thermal insulating systems of inorganic lightweight aggregate mortar
2019-05-17
现行
ASTM C331/C331M-23
Standard Specification for Lightweight Aggregates for Concrete Masonry Units
混凝土砌块用轻质骨料标准规范
2023-06-01
现行
ASTM C1761/C1761M-23
Standard Specification for Lightweight Aggregate for Internal Curing of Concrete
混凝土内部养护用轻骨料标准规范
2023-06-01
现行
BS EN 14063-2-2013
Thermal insulation products for buildings. In-situ formed expanded clay lightweight aggregate products-Specification for the installed products
建筑隔热产品 原位成型膨胀粘土轻骨料产品 已安装产品的规格
2013-07-31
现行
DIN EN 14063-2
Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 2: Specification for the installed products
建筑物隔热产品.现场成型膨胀粘土轻骨料产品.第2部分:安装产品规范;德语版本EN 14063-2:2013
2013-10-01
现行
BS EN 14063-1-2004
Thermal insulation products for buildings. In-situ formed expanded clay lightweight aggregate products-Specification for the loose-fill products before installation
建筑隔热产品 原位成型膨胀粘土轻骨料制品
2007-08-31
现行
DIN EN 14063-1
Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation
隔热材料和产品.现场成型膨胀粘土轻骨料产品(LWA).第1部分:安装前松散填料产品规范;德语版本EN 14063-1:2004
2004-11-01
现行
UNE-EN 14063-1-2006
Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation
隔热材料和产品.现场成型膨胀粘土轻骨料产品(LWA).第1部分:安装前松散填料产品规范
2006-04-19