BS EN 13084-6:2015规定了衬里设计的特殊要求和性能标准 独立烟囱用钢制系统。它规定了圆柱钢的要求 EN 13084-1中规定的衬里。本文件涵盖了以下三种基本类型的轴承衬套的设计 结构:底座支撑衬垫；分段衬垫；上悬式班轮。此外，本文件适用于表面与烟气接触的单壁烟囱。根据EN 1856-1和EN 1856-2，由预制金属烟囱制成的衬里 按照本文件的规定，作为基础支撑衬里安装，并带有额外的支架和导轨。交叉引用:EN 1443EN 1856-1EN 1856-2EN 1859:2009+A1:2013EN 1991-1-4:2005EN 1993-1-6EN 1993-3-2:2006EN 10028EN 10088EN 10095EN 13084-1:2007EN 13084-7:2012EN 62305-1IEC 62305-1EN ISO 13920ISO 13920购买本文件时可提供的所有当前修订。

BS EN 13084-6:2015 deals with special requirements and performance criteria for the design of lining systems made of steel for free standing chimneys. It specifies the requirements for cylindrical steel liners as stated in EN 13084-1.This document covers the design of the following three basic types of liners located in a load bearing structure:base supported liner;sectional liner;top hung liner.Additionally this document applies to single wall chimneys whose surface is in contact with flue gases.Liners built from prefabricated metal chimneys in accordance with EN 1856-1 and EN 1856-2 are installed as base supported liners with additional supports and guides as defined in this document.Cross References:EN 1443EN 1856-1EN 1856-2EN 1859:2009+A1:2013EN 1991-1-4:2005EN 1993-1-6EN 1993-3-2:2006EN 10028EN 10088EN 10095EN 13084-1:2007EN 13084-7:2012EN 62305-1IEC 62305-1EN ISO 13920ISO 13920All current amendments available at time of purchase are included with the purchase of this document.