ISO 15136-1:2009规定了石油和天然气行业用螺杆泵的设计、设计验证和确认、制造和数据控制、性能评级、功能评估、维修、搬运和储存要求。ISO 15136-1:2009适用于符合本文中螺杆泵（PCP）定义的产品。 ISO 15136-1:2009未涵盖驱动管柱和管件的连接。 ISO 15136-1:2009规定了定子弹性体材料的特性和测试、设计验证和功能评估的要求，并提供了PCP弹性体选择和测试、安装、启动和运行指南、设备选择和应用指南、功能规范表、二手泵评估、驱动串选择和使用的信息，维修和翻新程序及辅助设备。 ISO 15136-1:2009要求未涵盖的设备包括底部驱动系统，但PCP组件、驱动管柱组件和辅助设备除外，如标记杆、气体分离器和扭矩锚。

ISO 15136-1:2009 provides requirements for the design, design verification and validation, manufacturing and data control, performance ratings, functional evaluation, repair, handling and storage of progressing cavity pumps for use in the petroleum and natural gas industry. ISO 15136-1:2009 is applicable to those products meeting the definition of progressing cavity pumps (PCP) included herein. Connections to the drive string and tubulars are not covered in ISO 15136-1:2009. ISO 15136-1:2009 establishes requirements for characterization and testing of stator elastomer material, design validation and functional evaluation and provides information for PCP elastomer selection and testing, installation, start-up and operation guidelines, equipment selection and application guidelines, functional specification form, used pump evaluation, drive string selection and use, repair and reconditioning procedures and auxiliary equipment. Equipment not covered by the requirements of ISO 15136-1:2009 includes bottom-drive systems except for the PCP components, drive-string components and auxiliary equipment such as tag bars, gas separators and torque anchors.