BS 2782-3:METHOD 346A:1984-塑料的试验方法机械性能层压管各层间粘结力的测定-国家数字标准馆

现行 BS 2782-3:METHOD 346A:1984

到馆提醒

收藏跟踪

购买正版

Methods of testing plastics. Mechanical properties-Determination of cohesion between layers of laminated tube 塑料的试验方法机械性能层压管各层间粘结力的测定

发布日期： 1984-12-15

描述了一种失效试验，该试验表明了层压管的强度，尤其是层压板之间的内聚力。交叉引用:BS 2782:第0BS 5214部分:第1BS 6128部分:第1部分:工作健康和安全等法案1974石棉法规1969购买本文件时，所有现行修订均包括在内。

Describes a test to failure which indicates the strength of the laminated tube, in particular the cohesion between the laminae.Cross References:BS 2782:Part 0BS 5214:Part 1BS 6128:Part 1Health and Safety at Work etc. Act 1974Asbestos Regulations 1969All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

BS 2782-3-METHOD 365A-1976

Methods of testing plastics. Mechanical properties-Determination of softness number of flexible plastics materials
塑料的试验方法机械性能软塑料材料柔软度值的测定

BS 2782-3-METHOD 332A-1976

Methods of testing plastics. Mechanical properties-Stiffness of plastics film
塑料的试验方法机械性能塑料薄膜的刚度

BS 2782-3-METHOD 360C-1991

Methods of testing plastics. Mechanical properties-Determination of tear resistance of plastics film and sheeting by the initiation method
塑料的试验方法机械性能

BS 2782-3-METHOD 360A-1991

Methods of testing plastics. Mechanical properties. Determination of tear resistance of plastics film and sheeting by the Elmendorf method
塑料的试验方法机械性能用埃尔门多夫法测定塑料薄膜和薄板的耐撕裂性

BS 2782-3-METHOD 341A-1977

Methods of testing plastics. Mechanical properties-Determination of apparent interlaminar shear strength of reinforced plastics
塑料的试验方法机械性能增强塑料表观层间剪切强度的测定

BS EN ISO 6721-2-2019

Plastics. Determination of dynamic mechanical properties-Torsion-pendulum method
塑料动态力学性能的测定

BS 2782-3-METHOD 360B-1991

Methods of testing plastics. Mechanical properties. Determination of tear resistance of plastics film and sheeting by the trouser tear method
塑料的试验方法机械性能用裤子撕裂法测定塑料薄膜和薄板的耐撕裂性

BS 2782-6-METHOD 630A-1994

Methods of testing plastics. Dimensional properties-Determination of thickness by mechanical scanning of flexible sheet
塑料的试验方法维度属性柔性薄板机械扫描厚度的测定

Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension
塑料的标准试验方法:动态机械性能:拉伸

Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression
塑料的标准试验方法:动态机械性能:压缩

Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion
塑料的标准试验方法:动态机械性能:扭转

BS 2782-3-METHOD 352E-1996

Methods of testing plastics. Mechanical properties. Determination of impact resistance by the free-falling dart method (staircase method)
塑料的试验方法机械性能用自由落镖法（阶梯法）测定抗冲击性

BS 2782-3-METHOD 323B-1996

Methods of testing plastics-Mechanical properties-Flexural vibration. Non-resonance method
塑料的试验方法机械性能弯曲振动非共振法

BS 2782-3-METHOD 323C-1996

Methods of testing plastics-Mechanical properties-Shear vibration. Non-resonance method
塑料的试验方法机械性能剪切振动非共振法

BS 2782-3-METHOD 323D-1996

Methods of testing plastics-Mechanical properties-Torsional vibration. Non-resonance method
塑料的试验方法机械性能扭转振动非共振法

Standard Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology
塑料的标准试验方法:动态机械性能熔体流变学

ASTM D4473-08(2021)

Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior
塑料的标准试验方法:动态机械性能:固化性能

JIS K 7244-2-1998

Plastics -- Determination of dynamic mechanical properties -- Part 2: Torsion-pendulum method
塑料动态机械性能的测定第2部分:扭摆法

ISO 6721-2-2019

Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method
塑料 - 动态力学性能的测定 - 第2部分:扭转摆方法

GOST R 56745-2015

Пластмассы. Определение механических свойств при динамическом нагружении. Часть 2. Метод крутильного маятника
塑料动力学性能的测定扭转摆方法

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统