范围:本欧洲标准规定了用于建筑物隔热和/或隔音的松散填充纤维素绝缘（LFCI）产品在安装到墙壁、地板、走廊、屋顶和天花板中时的要求。 本欧洲标准是之前松散填充纤维素绝缘（LFCI）产品的规范 安装 本欧洲标准描述了产品特性，包括测试、标记和测试程序 以及标签和合规性评估规则。本欧洲标准涵盖的产品也可用于预制隔热系统 和复合板；不包括包含这些产品的系统的结构性能。 本欧洲标准不包括在10摄氏度和摄氏度下宣称导热系数大于0060 W/（m？K）或宣称热阻小于0.25平方米和K/W倍的产品。本欧洲标准未规定产品所需达到的所有性能水平 证明在特定应用中的适用性。所需的水平可在当地 规定与否- 相互冲突的标准。 本欧洲标准不包括工厂生产的纤维素产品，这些产品被作为蝙蝠、垫子等投放市场 或用于建筑物隔热的板材，或用于建筑设备和工业装置隔热的松散填充纤维素产品。交叉引用:ISO 354:2003ISO 11925-2:2010EN 12086:2013EN ISO 354:2003EN 13823:2010EN 13172:2012ISO 11654:1997（R08）ISO 12491EN ISO 11925-2EN 12667EN 312EN ISO 10456EN 1609EN ISO 11654EN 29053EN 13238ISO 9053EN 13501-1EN 520EN 16733EN 508- 1ISO 12571:2013EN 13171:2012EN 15101-2EN ISO 12571包含以下内容:修订，2019年5月

Scope: This European Standard specifies requirements for loose-fill cellulose insulation (LFCI) products for the thermal and/or sound insulation of buildings when installed into walls, floors, galleries, roofs and ceilings. This European Standard is a specification for the loose-fill cellulose insulation (LFCI) products before installation. This European Standard describes the product characteristics and includes procedures for testing, marking and labelling and the rules for evaluation of conformity.Products covered by this European Standard may also be used in prefabricated thermal insulation systems and composite panels; the structural performance of systems incorporating these products is not covered. Products with a declared thermal conductivity at 10 °C greater than 0,060 W/(m?K) or a declared thermal resistance lower than 0,25 m2× K/W are not covered by this European Standard.This European Standard does not specify the required level of all properties to be achieved by a product to demonstrate fitness for purpose in a particular application. The required levels are to be found in local regulations or non-conflicting standards. This European Standard does not cover factory made cellulose products placed on the market as bats, mats or boards intended to be used for the insulation of buildings or loose-fill cellulose products for the insulation of building equipment and industrial installations.Cross References:ISO 354:2003ISO 11925-2:2010EN 12086:2013EN ISO 354:2003EN 13823:2010EN 13172:2012ISO 11654:1997 (R08)ISO 12491EN ISO 11925-2EN 12667EN 312EN ISO 10456EN 1609EN ISO 11654EN 29053EN 13238ISO 9053EN 13501-1EN 520EN 16733EN 508-1ISO 12571:2013EN 13171:2012EN 15101-2EN ISO 12571Incorporates the following:Amendment, May 2019