现行

UNE-EN 12061-1999

PLASTICS PIPING SYSTEMS. THERMOPLASTICS FITTINGS. TEST METHOD FOR IMPACT STRENGTH.
塑料管道系统 热塑性塑料配件 冲击强度的试验方法

1999-12-31

现行

UNE-EN 12256-1999

PLASTICS PIPING SYSTEMS - THERMOPLASTICS FITTINGS - TEST METHOD FOR MECHANICAL STRENGTH OR FLEXIBILITY OF FABRICATED FITTINGS
塑料管道系统.热塑性配件.装配配件的机械强度或柔韧性的试验方法

1999-07-28

现行

BS 2782-11-METHOD 1121H-1996

Methods of testing plastics. Thermoplastics pipes, fittings and valves-Thermoplastics pipes for the transport of liquids under pressure. Calculation of head losses
塑料的试验方法 热塑性塑料管道、配件和阀门 压力下液体输送用热塑性塑料管 水头损失的计算

1996-08-15

现行

BS 2782-11-METHOD 1108A-1989

Methods of testing plastics. Thermoplastics pipes, fittings and valves-True impact rate (TIR) boundaries of pipes
塑料的试验方法 热塑性塑料管、配件和阀门

1989-09-29

现行

AS/NZS 1462.2-2006

Methods of test for plastics pipes and fittings, Method 2: Method for determining the flattening properties of plastics pipes and fittings
塑料管道和配件的试验方法 方法2:塑料管道和配件压扁性能的测定方法

2006-02-22

现行

AS/NZS 1462.1-2006[ Pending Revision ]

Methods of test for plastics pipes and fittings, Method 1: Method for determining the dimensions of pipes and fittings
塑料管道和配件的试验方法 方法1:管道和配件尺寸的测定方法

2006-03-20

现行

AS/NZS 1462.4-2002

Methods of test for plastics pipes and fittings, Method 4: Method for determining reversion of plastics pipes
塑料管和配件的试验方法 方法4:塑料管回复性的测定方法

2002-07-04

现行

BS 2782-11-METHOD 1109A-1989

Methods of testing plastics. Thermoplastics pipes, fittings and valves-Resistance to environmental stress cracking of polyethylene pipes and fittings for non-pressure applications
塑料的试验方法 热塑性塑料管、配件和阀门

1989-10-31

现行

ASTM D2122-22

Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
测定热塑性塑料管和配件尺寸的标准试验方法

2022-07-01

现行

JIS K 6816-2008

Thermoplastics pipes and fittings -- Test method for Vicat softening temperature
热塑性塑料管材和管件维卡软化温度试验方法

2008-01-01

现行

KS M ISO 7686

플라스틱 관 및 이음관－불투명도－시험 방법
塑料管及管件不透明度试验方法

2016-12-27

现行

KS M ISO 7686(2021 Confirm)

플라스틱 관 및 이음관－불투명도－시험 방법
塑料管道和管件不透明度试验方法

2016-12-27

现行

AS/NZS 1462.29-2019

Methods of test for plastic pipes and fittings, Method 29: Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
塑料管道和配件的试验方法 方法29:塑料管道和管道系统.用外推法测定管形热塑性材料的长期静水压强度

2019-12-15

现行

BS EN ISO 19892-2018

Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of joints to pressure cycling
塑料管道系统 冷热水用热塑性塑料管及配件 接头耐压力循环的试验方法

2018-10-11

现行

BS ISO 19892-2011

Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of joints to pressure cycling
塑料管道系统 冷热水用热塑性塑料管及配件 接头耐压力循环的试验方法

2011-11-30

现行

ISO 19892-2011

Plastics piping systems — Thermoplastics pipes and fittings for hot and cold water — Test method for the resistance of joints to pressure cycling
塑料管道系统——冷热水用热塑性塑料管和配件——接头耐压力循环的试验方法

2011-10-21

现行

GOST R ISO 19892-2021

Трубопроводы из пластмасс. Трубы и фитинги из термопластов для горячей и холодной воды. Метод испытания соединений на стойкость к циклическому изменению давления
塑料管道系统 冷热水用热塑性塑料管和配件 接头耐压力循环的试验方法

现行

AS/NZS 1462.16-2006

Methods of test for plastics pipes and fittings, Method 16: Method for high temperature testing of pipe
塑料管道和配件的试验方法 方法16:管道高温试验方法

2006-02-22

现行

AS/NZS 1462.22-1997[ Pending Revision ]

Methods of test for plastics pipes and fittings, Method 22: Method for determination of pipe stiffness
塑料管道和配件的试验方法 方法22:管道刚度的测定方法

1997-01-05

现行

BS 2782-11-METHOD 1121C-1997

Methods of testing plastics. Thermoplastics pipes, fittings and valves-Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Inch-based series
塑料的试验方法 热塑性塑料管道、配件和阀门 流体输送用热塑性塑料管 标称外径和标称压力 基于英寸的系列

1997-06-15