1.1 本规范涵盖引用于 B800 在温度为“0”和H1X或H2X的情况下，由用作覆盖或绝缘电导体的圆形或异形电线制成的裸露、紧凑的圆形、压缩和常规同心敷设绞合导体。这些导线应由一个中心芯组成，中心芯由一层或多层压实、压缩或传统的螺旋形电线包围（解释 注1 和 注2 )。 1.2 电阻率的SI值被视为标准。对于所有其他特性，英寸- 磅单位被视为标准单位，国际单位制可能是近似单位。 1.3 本规范指南中也允许使用旨在防止水纵向传播的密封导体。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。

1.1 This specification covers aluminum alloys in the 8000 series cited in B800 in tempers “0” and H1X or H2X bare compact-round, compressed and conventional concentric-lay-stranded conductors made from round or shaped wires used as covered or insulated electrical conductors. These conductors shall be composed of a central core surrounded by one or more compacted, compressed or conventional layers of helically applied wires (Explanatory Note 1 and Note 2 ). 1.2 The SI values for resistivity are regarded as standard. For all other properties, the inch-pound units are regarded as standard and the SI units may be approximate. 1.3 Sealed conductors that are intended to prevent longitudinal water propagation are also permitted within the guidelines of this specification. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.