BS EN 14304:2015规定了工厂制造的柔性弹性泡沫产品的要求 用于建筑设备和工业装置的隔热 工作温度约为-200°C至+175°C。在-50°C的工作温度以下，对产品在环境中的适用性进行测试 应执行预期应用。在任何情况下都应注意制造商的建议。 产品以板材、管材、轧辊和胶带的形式制造，有涂层或无涂层 和/或自粘背衬和/或不同的封闭系统。本欧洲标准描述了产品特性，包括测试程序， 合格性、标记和评价。本标准涵盖的产品也用于预制隔热系统和 复合板；不包括包含这些产品的系统的性能。本欧洲标准未规定应达到的给定财产的要求水平 通过一种产品来证明其在特定应用中的适用性。测试所需的水平 给定的应用可以在法规和招标书中找到。在10°C下，宣称导热系数大于0050 W/（m·K）的产品不包括在 这个标准。本欧洲标准不包括用于建筑结构隔热的产品。本欧洲标准的规范性部分不包括压缩应力（见D.5）。交叉引用:EN 822EN 823EN 824EN 1604EN 1609EN 12086:2013EN 12667EN 12939EN 13172:2012EN 13467EN 13468EN 13469EN 13472EN 13501-1: 2007年1）1）1）1）1）1）1）1）1）2）2）2）2）2）2）3）4）7）15）15）15）15）15）15）15）15）15）15）15）15）15）15）15）15）15）15）15）15）15）15）15）15）15）9）10）3 3）国际ISO ISO ISO ISO ISO ISO ISO 354 4 4 4 4 ISO ISO 354 4 4 ISO ISO 354 4 ISO 354 4 4 ISO 354 4 4 4 4 ISO 354 4 4 4 ISO 354 4 4 4 4 4 4 4 ISO ISO 354 ISO 354 4 4 ISO ISO 4 4 4 4 4 4 4 4 4 4 4 4 ISO ISO ISO ISO ISO ISO 354 ISO 354 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 ISO ISO ISO ISO 354 4 4 4 4 4 4 4 4 4 4 4 ISO ISO ISO ISO ISO 354 4 4 4 4 4 4 4 4 ISO ISO ISO 1购买时提供的所有当前修订版包括在购买本文件时。

BS EN 14304:2015 specifies the requirements for factory made flexible elastomeric foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately - 200 °C to + 175 °C.Below an operating temperature of - 50 °C, tests regarding the suitability of the products in the intended application should be performed. Manufacturer's advice should be heeded in all cases. The products are manufactured in the form of sheets, tubes, rolls and tapes with or without coating and/or self-adhesive backing and/or different closure systems.This European Standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered.This European Standard does not specify the required level of a given property that should be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender.Products with a declared thermal conductivity greater than 0,050 W/(m·K) at 10 °C are not covered by this standard.This European Standard does not cover products for the insulation of the building structure.The normative part of this European Standard does not cover compressive stress (see D.5).Cross References:EN 822EN 823EN 824EN 1604EN 1609EN 12086:2013EN 12667EN 12939EN 13172:2012EN 13467EN 13468EN 13469EN 13472EN 13501-1:2007+A1:2009EN 13823EN 14366:2004EN 14706EN 14707EN 15715:2009EN ISO 354ISO 354EN ISO 3822-1ISO 3822-1EN ISO 4589-1ISO 4589-1EN ISO 8497ISO 8497EN ISO 9229:2007ISO 9229:2007EN ISO 11654ISO 11654EN ISO 11925-2ISO 11925-2EN ISO 13787ISO 13787EN 1366-3EN 1602EN 13238EN 13470EN ISO 10456ISO 10456:2007ISO 65VDI 2055Regulation (EU) No. 305/2011All current amendments available at time of purchase are included with the purchase of this document.