ISO 11090-1:2014参照ISO 230-1和ISO 230-2规定了几何和机械加工试验，以及用于检查普通精度和通用沉模电火花机床（沉模EDM）数控定位轴的精度和重复性的试验。它还规定了与上述试验相对应的适用公差。 ISO 11090-1:2014也适用于十字滑台型和固定台型的单柱机器。 ISO 11090-1:2014仅涉及机器精度的验证。 它不适用于机器运行的测试（振动、异常噪音、部件的粘滑运动等）或其特性的检查（如速度、进给等），通常应在精度测试之前进行检查。 ISO 11090-1:2014参考ISO 841:2001提供了机器主要部件的术语和轴的名称。 注:除ISO官方语言（英语和法语）中使用的术语外，ISO 11090本部分附录A还提供了荷兰语、德语、意大利语、瑞典语、波斯语和日语中的等效术语。 这些文件由荷兰（NEN）、德国（DIN）、意大利（UNI）、瑞典（SIS）、伊朗（ISIRI）和日本（JISC）的国家成员机构负责发布。然而，只有官方语言中给出的术语才可视为ISO术语。

ISO 11090-1: 2014 specifies, with reference to ISO 230？1 and ISO 230？2, geometric and machining tests and tests for checking accuracy and repeatability of numerically controlled positioning axes for normal accuracy and general-purpose die sinking electro-discharge machines (die sinking EDM). It also specifies the applicable tolerances corresponding to the above-mentioned tests. ISO 11090-1: 2014is also applicable to single-column machines of cross-slide table type and fixed table type. ISO 11090-1: 2014deals only with the verification of accuracy of the machine. It does not apply to the testing of the machine operation (vibrations, abnormal noises, stick-slip motion of components, etc.) or to the checking of its characteristics (such as speeds, feeds, etc.), which should generally be checked before the testing of the accuracy. ISO 11090-1: 2014provides the terminology used for the principal components of the machine and the designation of the axes with reference to ISO 841:2001. NOTE In addition to the terms used in the official ISO languages (English and French), Annex A of this part of ISO 11090 gives the equivalent terms in the Dutch, German, Italian, Swedish, Persian, and Japanese languages. These are published under the responsibility of the national member bodies for Netherlands (NEN), Germany (DIN), Italy (UNI), Sweden (SIS), Iran (ISIRI), and Japan (JISC). However, only the terms given in the official languages can be considered as ISO terms.