1.1本指南涵盖了锚和锚固系统的类别，并讨论了在选择能够抵抗重力荷载和施加荷载的锚或系统时应考虑的设计原则。 1.2本指南规定了石材锚固设计的基本要求，并提供了这些设计考虑因素的实用清单。 1.3本指南涉及: 1.3.1将石板直接锚固到建筑结构上以进行支撑， 1.3.2将这些支撑系统连接到建筑结构后，将石板锚固到副框架或幕墙组件上， 1.3.3在将这些支撑系统连接到建筑结构之前，将石板锚固到具有预组装石质覆层的子框架或幕墙组件上，以及 1.3.4监督和检查上述设备的制造和安装。 1.4遵守所有适用法规、制造商的具体建议和接口工作标准。 1.5以英寸-磅为单位的数值应视为标准值。括号中给出的国际单位仅供参考。 1.6 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。（见表1和表2。）

1.1 This guide covers the categories of anchors and anchoring systems and discusses the design principles to be considered in selecting anchors or systems that will resist gravity loads and applied loads. 1.2 This guide sets forth basic requirements for the design of stone anchorage and provides a practical checklist of those design considerations. 1.3 This guide pertains to: 1.3.1 The anchoring of stone panels directly to the building structure for support, 1.3.2 The anchoring of stone panels to subframes or to curtainwall components after these support systems are attached to the building structure, 1.3.3 The anchoring of stone panels to subframes or to curtainwall components with stone cladding preassembled before these support systems are attached to the building structure, and 1.3.4 The supervision and inspection of fabrication and installation of the above. 1.4 Observe all applicable regulations, specific recommendations of the manufacturers, and standards governing interfacing work. 1.5 The values stated in inch-pound units are to be regarded as the standard. The SI units given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. (See Tables 1 and 2.)