本规范规定了印刷电路板或印刷线路板（以下简称印刷板）的一般性能要求，以及确保这些项目符合适用性能要求的验证要求。本规范的认证和资格认证允许制造商将合格制造商名单（QML）（见6.4.32）程序应用于根据非QML文件采购的印刷板，如MIL“PRF”55110和MIL“P”50884（见6.3.5和6.5）。本规范旨在使印制板制造商能够灵活地最大限度地实施最佳商业实践，同时仍能提供满足军事性能需求的产品（见6.3.4）。允许这种灵活性的原则概念如下:|a.制造商形成了一个内部质量审查系统或组织，在本文件中称为技术审查委员会（TRB）（见6。 4.51). TRB负责实施质量管理（QM）计划（见6.4.41）。实施的质量管理计划成为制造商的质量管理（QM）计划（见6.4.42）|b.在制造商（见6.4.18）和鉴定活动（见6.4.37）之间建立关系。

This specification establishes the general performance requirements for printed circuit boards or printed wiring boards (hereafter designated printed board) and the verification requirements for insuring that these items meet the applicable performance requirements. Certification and qualification to this specification allows manufacturer's to apply the Qualified Manufacturers List (QML) (see 6.4.32) program to printed boards procured to non‰ÛÒQML documents such as MIL‰ÛÒPRF‰ÛÒ55110 and MIL‰ÛÒP‰ÛÒ50884 (see 6.3.5 and 6.5). The intent of this specification is to allow the printed board manufacturer the flexibility to implement best commercial practices to the maximum extent possible while still providing product that meets military performance needs (see 6.3.4). The principle concepts which allow this flexibility are as follows:|a. The manufacturer forms an internal quality review system or organization referred to in this document as the Technical Review Board (TRB) (see 6.4.51). The TRB is responsible for the implementation of a quality management (QM) plan (see 6.4.41). The implemented QM plan becomes the manufacturer's quality management (QM) program (see 6.4.42).|b. A relationship is established between the manufacturer (see 6.4.18) and the qualifying activity (see 6.4.37).