ISO 10360-9:2013规定了在接触和非接触模式下使用多个探测系统的各种设计坐标测量机的性能测试程序。它适用于验证制造商规定的坐标测量机及其探头性能的验收试验；用户为定期检查CMM及其探头而进行的再鉴定试验；用户在复验测试之间为监控CMM及其探头而进行的临时检查。 它考虑了单ram设计的坐标测量机，以及具有小或大重叠测量体积的多ram设计。它适用于由不同类型的探头组成的多个探测系统（例如一个成像探头与一个接触探头组合，或两个不同性能的接触探头）。 所述测试对CMM和探测系统引起的许多错误都很敏感；它们补充了长度测量测试和每个探测系统的单独探测误差测试。在执行ISO 10360-9:2013中的程序之前，应进行长度测量测试以及单独的探测误差测试（例如，ISO 10360-5、ISO 10360-7或ISO 10360-8）。

ISO 10360-9:2013 specifies procedures for testing the performance of coordinate measuring machines of various designs that use multiple probing systems in contacting and non-contacting mode. It applies to acceptance tests for verifying the performance of a CMM and its probes as stated by the manufacturer;reverification tests performed by the user for periodical checking of the CMM and its probes; interim checks performed by the user for monitoring the CMM and its probes in between reverification tests. It considers CMMs of single ram designs as well as multiple ram designs with small or with large overlapping measuring volume. It applies to multiple probing systems consisting of different types of probes (such as an imaging probe combined with a contacting probe, or two contacting probes of different individual performance). The tests described are sensitive to many errors attributable to both the CMM and the probing systems; they supplement the length measurement tests and the individual probing error tests of each probing system. The length measurement tests, as well as the individual probing error tests (for example, ISO 10360-5, ISO 10360-7, or ISO 10360-8), should be performed before executing the procedures in ISO 10360-9:2013.