BS EN 14359:2017规定了材料、设计、制造、测试检查、安全设备配置和文件（包括首次操作说明）的要求，对于常用类型的充气蓄能器和用于为流体动力应用提供额外气体容量的压力容器（见1.2）。1.2本欧洲标准适用于以下类型的部件，定义为充气蓄能器的承压外壳:气囊式；隔膜式；活塞式；转移类型；用于提供额外气体容量的压力容器。它们由一个或多个零件组成，通过各种机械方式和焊接连接在一起。1.3本欧洲标准适用于在以下条件下运行的充气蓄能器:内部表压大于0.5巴；工作温度不低于-50°C且不高于+200°C；包含压力设备指令2014/68/EU中定义的所有液体和气体， 见附注。参考:EN 13445-4:4:4:4:4:4:4:4:4:4:4:2014年3:3 ED3 3 ISO 898-1:2013年ED5ISO 1071-1:1:1:1:1:1:1:2009 4 4:1:1:1:1:1:1:1:1:1:1:1:1:1:1:2009 2009 4 EN ISO（4）EN ISO 404040404:4:4:4:4:4:1:1:1:1:1:1:1:1:1:1:1:1:1:1:1:1:1:1:1:1:1:1:1:1:1非非非非非ISO 40404040404（4）ISO 40404:1:1:1:1:1:1:1:1:1:1:1:4）ISO 4040404（ISO 1584（ISO 1584）ISO 1584）ISO 1584:1:1:6506-3:2014）ASISO262:1998EN ISO 6506-1（ISO 6506-1:2014）ASEN ISO 148-1（ISO 2008-1:2013）ASISO 6506）adadad6）adadadad3）adadad3）adadad6）ad6）ad6）ad6）ad6）ad6）ad6）ad6）ad6）ad3）ad3）ad3）ad3）ad3）ad6）ad）ad6）ad）ad）ad6）ad）ad6）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad）ad1:2012 ASISO0（ISO 9000:2015）ASISO16269-6:2014 ED2ISO9000:2015 ISO 9606-1:2012 ED2EN ISO4413（ISO 4413:2010）ASEN ISO 148-1（ISO 148-1:2016）ASISO 148-1:2016购买时可用的所有现行修订均包含在本文件的购买中。

BS EN 14359:2017 specifies the requirements for materials, design, manufacture, testing inspection, safety equipment configuration and documentation (including instructions for first operation), for commonly-used types of gas-loaded accumulators and pressure vessels used to provide additional gas capacity for fluid power applications (see 1.2).1.2 This European Standard applies to the following types of components, defined as the pressure-containing envelope of gas-loaded accumulators:bladder type;diaphragm type;piston type;transfer type;pressure vessels used to provide additional gas capacity.They consist of one or several parts joined together by a variety of mechanical means and by welding.1.3 This European Standard applies to gas-loaded accumulators which operate with the following conditions:subject to an internal gauge pressure greater than 0,5 bar;working temperature not lower than -50 °C and not higher than +200 °C;containing all liquids and gases as defined in the Pressure Equipment Directive 2014/68/EU, see Note.Cross References:EN 13445-4:2014ISO 6506-3:2014 ED3ISO 898-1:2013 ED5ISO 10771-1:2015ISO 15614-1:2004EN ISO 6892-1 (ISO 6892-1:2016)EN 10204:2004ISO 9110-2:1990 (R05)EN ISO 15614-1ISO 148-1:2016EN 13445-2:2014ISO 6506-1:2014 ED3ISO 9110-1:1990 (R05)EN 13445-3:2014EN ISO 6506-2 (ISO 6506-2:2014) ASEN ISO 6506-3 (ISO 6506-3:2014) ASISO 262:1998EN ISO 6506-1 (ISO 6506-1:2014) ASEN ISO 148-1 (ISO 148-1:2016) ASEN 13018:2016ISO 6892-1:2016EN ISO 898-1 (ISO 898-1:2013) ASISO 6506-2:2014 ED3 ISO 4413:2010 CD-ROM Ed 3EN ISO 9606-1 (ISO 9606-1:2012) ASISO 9001:2015EN ISO 6743-4 (ISO 6743-4:2015) ASISO 5598:2008 Ed 2EN 1968:2002ISO 2944:2000ISO 6743-4:2015EN ISO 9001 (ISO 9001:2015) ASISO 12107:2012 ED2EN ISO 9000 (ISO 9000:2015) ASISO 16269-6:2014 ED2ISO 9000:2015ISO 9606-1:2012 ED2EN ISO 4413 (ISO 4413:2010) ASEN ISO 148-1 (ISO 148-1:2016) ASISO 148-1:2016All current amendments available at time of purchase are included with the purchase of this document.