TUBE BEND RADII (FUTURE ACQUISITIONS FOR THIS ITEM SHOULD REFER TO SAE-AS33611(R01), "TUBE BEND RADII.") (S/S BY SAE-AS33611(R01)) (SUPERSEDING MS33611)
卡套管弯曲半径（该项目的未来采购应参考SAE-AS33611（R01） “卡套管弯曲直径”）

1997-08-21

STRIP, MOUNTING, NUT INSULATING, FOR MS 27212 TERMINAL BOARD (FUTURE ACQUISITIONS FOR THIS ITEM SHOULD REFER TO SAE-AS-33731) (S/S BY SAE-AS33731) (SUPERSEDING MS3373B)
MS 27212端子板用带式、安装式、螺母绝缘（该项目的未来采购应参考SAE-AS-33731）（由SAE-AS33731提供）（取代MS3373B）

1972-03-07

STRIP, MOUNTING, NUT INSULATING, FOR MS 27212 TERMINAL BOARD (FUTURE ACQUISITIONS FOR THIS ITEM SHOULD REFER TO SAE-AS-33731) (S/S BY SAE-AS33731) (SUPERSEDING MS3373B)
MS 27212端子板的螺母绝缘安装条（该项目的未来采购应参考SAE-AS-33731）（由SAE-AS33731提供）（取代MS3373B）

1997-09-29

SCREW, EXTERNALLY RELIEVED BODY (SYNCHRO) (FUTURE ACQUISITION FOR THIS ITEM SHOULD REFER TO SAE-AS-17184, "SCREW, EXTERNALLY RELIEVED BODY (SYNCHRO)") (S/S BY SAE-AS17184A)
外部卸压阀体（同步器）螺钉（本项目的未来采购应参考SAE-AS-17184 “外部卸压阀体（同步器）螺钉”）（由SAE-AS17184A提供）

1960-09-20

TUBING END DOUBLE FLARE, STANDARD DIMENSIONS FOR (FUTURE ACQUISITIONS SHOULD REFER TO SAE-AS-33583) (S/S BY SAE-AS33583(R01)) (SUPERSEDING MS33583B)
管端双扩口 标准尺寸（未来采购应参考SAE-AS-33583）（S/S由SAE-AS33583（R01）提供）（取代MS33583B）

1993-06-28

TUBING END DOUBLE FLARE, STANDARD DIMENSIONS FOR (FUTURE ACQUISITIONS SHOULD REFER TO SAE-AS-33583) (S/S BY SAE-AS33583(R01)) (SUPERSEDING MS33583B)
油管端双火炬 标准尺寸（未来的采购应参考SAE-AS-33583）（由SAE-AS33583（R01）提供）（取代MS33583B）

1998-01-14

BENDS, ELECTRICAL CONDUIT 90 DEGREE AND 45 DEGREE ZINC-COATED STD THK-WALL STEEL (FUTURE ACQUISITION FOR THIS ITEM SHOULD REFERENCE UL 6) (SUPERSEDING MS75022) (S/S BY NO S/S DOCUMENT)
弯管、90度和45度镀锌标准厚壁钢导管（本项目的未来采购应参考UL 6）（取代MS75022）（S/S无S/S文件）

1973-01-08

BENDS, ELECTRICAL CONDUIT 90 DEGREE AND 45 DEGREE ZINC-COATED STD THK-WALL STEEL (FUTURE ACQUISITION FOR THIS ITEM SHOULD REFERENCE UL 6) (SUPERSEDING MS75022) (S/S BY NO S/S DOCUMENT)
弯管、电线管90度和45度镀锌标准THK壁钢（该项目的未来采购应参考UL 6）（取代MS75022）（无S/S文件）

1998-02-09

BENDS, ELECTRICAL CONDUIT 90 DEGREE AND 45 DEGREE ZINC-COATED STD THK-WALL STEEL (FUTURE ACQUISITION FOR THIS ITEM SHOULD REFERENCE UL 6) (SUPERSEDING MS75022) (S/S BY NO S/S DOCUMENT)
弯管、电线管90度和45度镀锌标准THK壁钢（该项目的未来采购应参考UL 6）（取代MS75022）（无S/S文件）

1992-10-15