MIL MIL-DTL-45910D-螺纹锁紧和环锁紧锯齿嵌件通用规范-国家数字标准馆

现行 MIL MIL-DTL-45910D

到馆提醒

收藏跟踪

购买正版

Insert, Screw Thread-Locked in and Ring Locked, Serrated General Specification for 螺纹锁紧和环锁紧锯齿嵌件通用规范

发布日期： 2015-06-18

本规范涵盖了锁定插入件的要求。插入件的锁紧方法应采用锯齿状套环和附件锁环，并在母材内安装匹配的锯齿，以防止旋转（见6.1）。

This specification covers the requirements for locked in inserts. The method of locking in the insert should be by means of a serrated collar and an accessory lock ring with matching serrations installed within the parent material to prevent rotation (see 6.1).

分类信息

发布单位或类别：美国-美国军事规范和标准

关联关系

研制信息

相似标准/计划/法规

MIL MS51991D Amendment 1

Insert, Screw Thread-Locked in, Ring Locked, Serrated
插入件螺纹锁定环锁定锯齿形

Insert, Screw Thread-Locked in, Ring Locked, Serrated
镶块螺纹锁紧环锁紧锯齿形

MIL MS51991D Notice 1-Validation 1

Insert, Screw Thread-Locked in, Ring Locked, Serrated
插入件螺纹锁定环锁定锯齿形

MIL MIL-DTL-45910D Notice 1-Validation 1

Insert, Screw Thread-Locked in and Ring Locked, Serrated General Specification for
带锯齿的螺纹锁紧和环锁紧嵌件通用规范

MIL MS51993B Notice 1-Validation 1

Insert, Screw Thread-Locked in, Ring Locked, Serrated, High Strength
插入螺纹锁定锁定锯齿高强度

MIL MS51991C Amendment 1

INSERT, SCREW THREAD - LOCKED IN, RING LOCKED, SERRATED (SUPERSEDING MS51991B)
锯齿形锁紧环内螺纹嵌件（取代MS51991B）

Insert, Screw Thread-Locked in, Ring Locked, Serrated, High Strength
插入件螺纹锁定环锁定锯齿状高强度

MIL MS51993B Amendment 1(amendment incorporated)

Insert, Screw Thread-Locked in, Ring Locked, Serrated, High Strength
插入件螺纹锁定环锁定锯齿状高强度

MIL MS51998 Notice 4-Validation 4

INSERT, SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
插入件螺纹锁定环锁定锯齿状设计和使用限制

MIL MS51998 Notice 1-Validation 1

INSERT, SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
插入件螺纹锁定环锁定锯齿状设计和使用限制

MIL MS51998 Notice 2-Validation 2

INSERT, SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
插入件螺纹锁定环锁定锯齿状设计和使用限制

INSERT, SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
嵌件螺纹锁紧环锁紧锯齿形设计和使用限制

MIL MS51498 Amendment 1

INSERT,SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, HIGH STRENGTH, OVERSIZE REPLACER
插入件螺纹锁紧环锁紧锯齿状高强度超大更换件

MIL MS51993A Amendment 1

INSERT, SCREW THREAD - LOCKED IN, RING LOCKED, SERRATED, HIGH STRENGTH (SUPERSEDING MS51993)
螺纹锁紧、环锁紧、锯齿状、高强度插入件（取代MS51993）

MIL MS51498 Notice 1-Validation 1

INSERT,SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, HIGH STRENGTH, OVERSIZE REPLACER
插入件螺纹锁紧环锁紧锯齿状高强度超大更换件

MIL MS51498 Notice 3-Cancellation 1

INSERT,SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, HIGH STRENGTH, OVERSIZE REPLACER
插入件螺纹锁紧环锁紧锯齿状高强度超大更换件

INSERT,SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, HIGH STRENGTH, OVERSIZE REPLACER
插入件螺纹锁紧环锁紧锯齿形高强度超大替换件

MIL MS51498 Notice 4-Reinstatement 1

INSERT,SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, HIGH STRENGTH, OVERSIZE REPLACER
插入件螺纹锁紧环锁紧锯齿状高强度超大更换件

DOD DOD-I-63276A

INSERT, SCREW THREAD, LOCKED IN, RING LOCKED, SERRATED, METRIC, GENERAL SPECIFICATION FOR (SUPERSEDING DOD-I-63276)
米制锁紧环锁紧螺纹嵌件通用规范（替代DOD-I-63276）

DOD DOD-I-63276/1A

INSERT, SCREW THREAD, LOCKED IN, RING LOCKED, SERRATED, METRIC (SUPERSEDING DOD-I-63276/1)
米制锁紧环锁紧螺纹嵌件（替代DOD-I-63276/1）

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统