首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 BS EN 12390-16:2019
到馆阅读
收藏跟踪
购买正版
Testing hardened concrete-Determination of the shrinkage of concrete 测试硬化混凝土 混凝土收缩率的测定
发布日期: 2019-10-10
本文件规定了在干燥条件下测定混凝土试样总收缩率的程序。 注1:24小时前可能发生的收缩或长度变化,以及在约束情况下可能产生的显著幅度和/或后果,可能需要根据本文件未涵盖的补充程序进行测量。 注2:附录a中给出了测定自收缩的简化程序信息。 该试验适用于混凝土中实际使用的骨料最粗部分(Dmax)的声明值不大于32 mm的试样。交叉引用:EN 12390-2EN 12504-1EN 12390-1EN 12350-1EN 1992-1-1:2004购买本文件时可获得的所有现行修订均包含在购买本文件中。
This document specifies the procedure for the determination of total shrinkage of concrete specimens in drying conditions. NOTE 1 Possible shrinkage or length changes occurring before 24 h of age, and which could have significant amplitude and/or consequences, in case of restraint, could need to be measured according to a complementary procedure not covered by this document. NOTE 2 Information on a simplified procedure for the determination of autogenous shrinkage is given in Annex A. The test is suitable for specimens having a declared value ofDof the coarsest fraction of aggregates actually used in the concrete (Dmax) not greater than 32 mm.Cross References:EN 12390-2EN 12504-1EN 12390-1EN 12350-1EN 1992-1-1:2004All current amendments available at time of purchase are included with the purchase of this document.
分类信息
发布单位或类别: 英国-英国标准学会
关联关系
研制信息
相似标准/计划/法规
现行
DIN EN 12390-16
Testing hardened concrete - Part 16: Determination of the shrinkage of concrete
硬化混凝土试验.第16部分:混凝土收缩的测定
2019-12-01
现行
ACI 209.1R-05
Report on Factors Affecting Shrinkage and Creep of Hardened Concrete
硬化混凝土收缩徐变影响因素报告
2005-01-01
现行
ACI 209.2R-08
Guide for Modeling and Calculating Shrinkage and Creep in Hardened Concrete
硬化混凝土收缩和徐变建模和计算指南
2008-01-01
现行
BS EN 12390-17-2019
Testing hardened concrete-Determination of creep of concrete in compression
测试硬化混凝土 混凝土受压蠕变的测定
2019-10-10
现行
BS EN 12390-7-2019
Testing hardened concrete-Density of hardened concrete
测试硬化混凝土
2020-11-16
现行
BS ISO 1920-8-2009
Testing of concrete-Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory
混凝土试验
2009-11-30
现行
BS ISO 1920-4-2020
Testing of concrete-Strength of hardened concrete
混凝土试验
2020-01-15
现行
UNE-EN 12390-7-2009
Testing hardened concrete - Part 7: Density of hardened concrete
硬化混凝土的试验.第7部分:硬化混凝土的密度
2009-10-14
现行
BS EN 12390-11-2015
Testing hardened concrete-Determination of the chloride resistance of concrete, unidirectional diffusion
测试硬化混凝土
2015-08-31
现行
UNE 83981-2008
Concrete durability. Test methods. Determination to gas permeability of hardened concrete.
混凝土耐久性 测试方法 硬化混凝土气体渗透性的测定
2008-07-02
现行
DIN EN 12390-17
Testing hardened concrete - Part 17: Determination of creep of concrete in compression
硬化混凝土试验.第17部分:受压混凝土蠕变的测定
2019-12-01
现行
BS 1881-124-2015+A1-2021
Testing Concrete-Methods for analysis of hardened concrete
测试混凝土
2021-02-26
现行
ISO 1920-8-2009
Testing of concrete — Part 8: Determination of drying shrinkage of concrete for samples prepared in the field or in the laboratory
混凝土试验第8部分:现场或实验室制备样品的混凝土干缩测定
2009-03-18
现行
DIN EN 680
Determination of the drying shrinkage of autoclaved aerated concrete
蒸压加气混凝土干燥收缩的测定;德文版EN 680:2005
2006-03-01
现行
BS EN 680-2005
Determination of the drying shrinkage of autoclaved aerated concrete
蒸压加气混凝土干燥收缩的测定
2006-01-16
现行
UNE-EN 680-2006
Determination of the drying shrinkage of autoclaved aerated concrete
蒸压加气混凝土干燥收缩的测定
2006-11-29
现行
UNE-EN 680-1995
DETERMINATION OF THE DRYING SHRINKAGE OF AUTOCLAVED AERATED CONCRETE.
蒸压加气混凝土干燥收缩的测定
1995-05-08
现行
BS EN 12390-12-2020
Testing hardened concrete-Determination of the carbonation resistance of concrete. Accelerated carbonation method
测试硬化混凝土
2020-04-02
现行
BS EN 12390-15-2019
Testing hardened concrete-Adiabatic method for the determination of heat released by concrete during its hardening process
测试硬化混凝土 测定混凝土硬化过程中释放热量的绝热法
2019-08-07
现行
BS EN 14488-1-2005
Testing sprayed concrete-Sampling fresh and hardened concrete
测试喷射混凝土 新拌和硬化混凝土取样
2005-12-05