IEC 61340-5-1:20 24适用于以下组织:制造、加工、组装、安装、包装、贴标签、维修、测试、检查、运输或以其他方式处理耐压大于或等于100 V人体模型（HBM）和200 V充电设备模型（CDM）的电气或电子零件、组件和设备。此外，通过将隔离导体上的电压限制在35 V以下来解决对隔离导体的保护。具有较低耐受电压的ESD可能需要额外的控制元件或调整的限制。设计用于处理ESD耐压较低的物品的工艺仍可声称符合本文件。本文件提供了ESD控制程序的要求。IEC TR 61340-5-2为本文件的实施提供了指导。本文件不适用于电引爆爆炸装置、易燃液体、气体和粉末。本文件的目的是提供建立、实施和维护ESD控制计划（以下简称“计划”）的管理和技术要求。与上一版相比，此版本包括以下重大技术变更: a)文件中增加了定义； b)产品鉴定要求的更新； c)子条款5.3.3现在包括对可接地静电控制服装系统的引用； d)替换表2； e)更新了第5.3.4.2款，以定义什么是绝缘体； f)更新了第5.3.4.3款，以包括绝缘导体的定义； g)更新了表3，增加了技术项目，包括参考IEC 61340-5-4用于符合性验证测试； h)增加表4作为IEC 61340-5-3中要求的总结，并包括包装符合性验证的要求； i)附件A已被取代:不再需要以前的附件。附件A是裁剪的例子。

IEC 61340-5-1:2024 applies to organizations that: manufacture, process, assemble, install, package, label, service, test, inspect, transport, or otherwise handle electrical or electronic parts, assemblies and equipment with withstand voltages greater than or equal to 100 V human body model (HBM) and 200 V charge device model (CDM). Also, protection from isolated conductors is addressed by limiting the voltage on isolated conductors to less than 35 V. ESDS with lower withstand voltages can require additional control elements or adjusted limits. Processes designed to handle items that have lower ESD withstand voltage(s) can still claim compliance to this document. This document provides the requirements for an ESD control program. IEC TR 61340-5-2 provides guidance on the implementation of this document. This document does not apply to electrically initiated explosive devices, flammable liquids, gases, and powders. The purpose of this document is to provide the administrative and technical requirements for establishing, implementing, and maintaining an ESD control program (hereinafter referred to as the “program”). This edition includes the following significant technical changes with respect to the previous edition:
a) definitions have been added to the document;
b) updates to product qualification requirements;
c) subclause 5.3.3 now includes a reference to groundable static control garment systems;
d) Table 2 was replaced;
e) subclause 5.3.4.2 was updated to define what an insulator is;
f) subclause 5.3.4.3 was updated to include a definition for isolated conductor;
g) Table 3 was updated, technical items added, including a reference to IEC 61340-5-4 for compliance verification testing;
h) Table 4 was added as a summary of the requirements in IEC 61340-5-3 and to include requirements for compliance verification of packaging;
i) Annex A was replaced: the former Annex is no longer required. Annex A are examples of tailoring.