现行

MIL MIL-B-81934/1C Amendment 1

BEARING, SLEEVE, PLAIN SELF-LUBRICATING, 325 DEGREES F (S/S BY SAE-AS81934/1)
轴承 套筒 普通自润滑 325°F（S/S BY SAE-AS81934/1）

1991-05-03

现行

MIL MIL-B-81934/2D Notice 1-Cancellation

BEARING, SLEEVE, FLANGED, SELF-LUBRICATING, 325 DEG. F (SUPERSEDING MIL-B-81934/2C) (S/S BY SAE-AS81934/2)
自润滑法兰套轴承 325华氏度（代替MIL-B-81934/2C）（由SAE-AS81934/2制成）

1998-07-02

现行

MIL MIL-B-81934/2D

BEARING, SLEEVE, FLANGED, SELF-LUBRICATING, 325 DEG. F (SUPERSEDING MIL-B-81934/2C) (S/S BY SAE-AS81934/2)
325华氏度自润滑法兰套筒轴承（取代MIL-B-81934/2C）（由SAE-AS81934/2提供）

1994-12-05

现行

MIL MIL-B-81934/1D Notice 1-Cancellation

BEARING, SLEEVE, PLAIN, SELF-LUBRICATING, 325 DEG. F (SUPERSEDING MIL-B-81934/1C) (S/S BY SAE-AS81934/1)
自润滑普通套筒轴承 325华氏度（代替MIL-B-81934/1C）（由SAE-AS81934/1制成）

1998-07-02

现行

MIL MIL-B-81934/1D

BEARING, SLEEVE, PLAIN, SELF-LUBRICATING, 325 DEG. F (SUPERSEDING MIL-B-81934/1C) (S/S BY SAE-AS81934/1)
325华氏度自润滑滑动套筒轴承（取代MIL-B-81934/1C）（由SAE-AS81934/1提供）

1994-12-05

现行

MIL MIL-B-81934B Notice 1-Cancellation

BEARINGS, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING, GENERAL SPECIFICATION FOR (SUPERSEDING MIL-B-81934A) (S/S BY SAE-AS81934)
自润滑滑动和法兰连接套筒轴承（代替MIL-B-81934A）的一般规范

1998-07-02

现行

MIL MIL-B-81934B

BEARINGS, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING, GENERAL SPECIFICATION FOR (SUPERSEDING MIL-B-81934A) (S/S BY SAE-AS81934)
自润滑平套和法兰轴承通用规范（取代MIL-B-81934A）（由SAE-AS81934提供）

1991-05-03

现行

MIL MS14102J Notice 1-Cancellation

BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, WIDE, CHAMFERED OUTER RING, -65 DEG. F TO 325 DEG. F (SUPERSEDING MS14102H) (S/S BY SAE-AS14102)
滑动轴承 自润滑 自对准 低速 宽 倒角外圈 -65°F至325°F（取代MS14102H）（由SAE-AS14102提供）

1997-08-25

现行

MIL MS14104J Notice 1-Cancellation

BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, NARROW, CHAMFERED OUTER RING, -65 DEG. F TO 325 DEG. F (SUPERSEDING MS14104H) (S/S BY SAE-AS14104)
滑动轴承 自润滑 自对准 低速 窄 斜切外圈 -65华氏度至325华氏度（取代MS14104H）（由SAE-AS14104提供）

1997-08-25

现行

MIL MS14102J

BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, WIDE, CHAMFERED OUTER RING, -65 DEG. F TO 325 DEG. F (SUPERSEDING MS14102H) (S/S BY SAE-AS14102)
自润滑自对准低速宽倒角外圈滑动轴承 -65华氏度至325华氏度（取代MS14102H）（由SAE-AS14102提供）

1994-12-05

现行

MIL MS14104J

BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, NARROW, CHAMFERED OUTER RING, -65 DEG. F TO 325 DEG. F (SUPERSEDING MS14104H) (S/S BY SAE-AS14104)
自润滑自对准低速窄倒角外圈滑动轴承 -65华氏度至325华氏度（取代MS14104H）（由SAE-AS14104提供）

1994-12-05

现行

MIL MS14103J Notice 1-Cancellation

BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, WIDE, GROOVED OUTER RING, -65 DEG. TO 325 DEG. F (SUPERSEDING MS14103H) (S/S BY SAE-AS14103A)
滑动轴承 自润滑 自对准 低速 宽 带槽外圈 -65°至325°F（取代MS14103H）（由SAE-AS14103A提供）

1997-08-25

现行

MIL MS14101J Notice 1-Cancellation

BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, NARROW, GROOVED OUTER RING, -65 DEG. TO 325 DEG. F (SUPERSEDING MS14101H) (S/S BY SAE-AS14101)
滑动轴承 自润滑 自对准 低速 窄槽外圈 -65°至325°F（取代MS14101H）（由SAE-AS14101提供）

1999-05-03

现行

MIL MS14101J

BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, NARROW, GROOVED OUTER RING, -65 DEG. TO 325 DEG. F (SUPERSEDING MS14101H) (S/S BY SAE-AS14101)
低速窄槽滑动自润滑自对准轴承外圈-65华氏度至325华氏度（取代MS14101H）（由SAE-AS14101提供）

1994-12-05

现行

MIL MS14103J

BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, WIDE, GROOVED OUTER RING, -65 DEG. TO 325 DEG. F (SUPERSEDING MS14103H) (S/S BY SAE-AS14103A)
低速宽槽滑动自润滑自对准轴承外圈-65华氏度至325华氏度（取代MS14103H）（由SAE-AS14103A提供）

1994-12-05

现行

MIL MIL-B-81935/5B Amendment 1

BEARING, PLAIN, ROD END, SELF-ALIGNING, SELF LUBRICATING, NARROW, INTERNALLY THREADED, -65 DEG. F TO +325 DEG. F (SUPERSEDING MIL-B-81935/5A) (S/S BY SAE-AS81935/5)
滑动轴承 杆端 自对准 自润滑 窄 内螺纹 -65°F至+325°F（取代MIL-B-81935/5A）（由SAE-AS81935/5提供）

1991-04-19

现行

MIL MIL-B-81935/2D Amendment 1

BEARING, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING, WIDE, INTERNALLY THREADED, -65 DEG. F TO +325 DEG. F (SUPERSEDING MIL-B-81935/2C) (S/S BY SAE-AS81935/2)
滑动轴承 杆端 自对准 自润滑 宽 内螺纹 -65°F至+325°F（取代MIL-B-81935/2C）（由SAE-AS81935/2提供）

1991-04-19

现行

MIL MIL-B-81935/4A Amendment 1

BEARING, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING, NARROW, EXTERNALLY THREADED, -65 DEG. F TO +325 DEG. F (SUPERSEDING MIL-B-81935/4) (S/S BY SAE-AS81935/4)
滑动轴承 杆端 自对准 自润滑 窄 外螺纹 -65°F至+325°F（取代MIL-B-81935/4）（由SAE-AS81935/4制成）

1991-04-19

现行

MIL MIL-B-81935/1B Amendment 1

BEARING, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING, WIDE, EXTERNALLY THREADED, -65 DEG. F TO +325 DEG. F (SUPERSEDING MIL-B-81935/1A) (S/S BY SAE-AS81935/1)
滑动轴承 杆端 自对准 自润滑 宽 外螺纹 -65°F至+325°F（取代MIL-B-81935/1A）（由SAE-AS81935/1提供）

1991-04-19

现行

MIL MIL-B-81935/4A Notice 1-Cancellation

BEARING, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING, NARROW, EXTERNALLY THREADED, -65 DEG. F TO +325 DEG. F (SUPERSEDING MIL-B-81935/4) (S/S BY SAE-AS81935/4)
滑动轴承 杆端 自对准 自润滑 窄 外螺纹 -65°F至+325°F（取代MIL-B-81935/4）（由SAE-AS81935/4制成）

1998-04-23