Шайбы плоские для метрических болтов, винтов и гаек. Общий план
公制螺栓 螺钉和螺母的平垫圈 总计划

Plain washers for metric bolts, screws and nuts for general purposes. General plan
通用公制螺栓、螺钉和螺母用平垫圈 总体规划

2007-04-30

Plain washers for metric bolts, screws and nuts for general purposes — General plan
通用公制螺栓、螺钉和螺母用平垫圈——总体规划

2000-06-08

Plain washers for metric bolts, screws and nuts for general purposes -- General plan
通用公制螺栓、螺钉和螺母用平垫圈总平面图

2008-01-01

Plain washers for metric bolts, screws and nuts for general purposes, Part 1: General plan
通用公制螺栓、螺钉和螺母用平垫圈第1部分:总平面图

2002-09-27

Plain washers for metric bolts, screws and nuts for general purposes - General plan. (ISO 887:2000).
通用公制螺栓、螺钉和螺母用平垫圈.总平面图 （ISO 887:2000）

2000-12-12

일반용 미터 볼트, 스크루 및 너트에 대한 평와셔 - 통칙
平垫圈米制螺栓 一般用途螺丝andnuts - 总体规划

2004-09-30

Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000 + Cor. 1:2006)
通用公制螺栓、螺钉和螺母用平垫圈.总平面图（ISO 887-2000+Cor.1-2006）；德文版EN ISO 887:2000+AC:2006

2006-07-01

Изделия крепежные. Допуски. Часть 3. Шайбы плоские для болтов, винтов и гаек. Классы точности А и С.
紧固件 公差 用于螺栓 螺丝和螺母的普通垫圈 产品等级A和C

2015-09-29

Tolerances for fasteners -- Part 3: Plain washers for bolts, screws and nuts -- Product grades A and C (FOREIGN STANDARD)
紧固件公差第3部分:螺栓、螺钉和螺母用平垫圈产品等级A和C（国外标准）

2008-01-01

ISO inch screw threads — General plan and selection for screws, bolts and nuts — Diameter range 0,06 to 6 in
ISO英制螺纹——螺钉、螺栓和螺母的总体规划和选择——直径范围为0.06至6英寸

1973-04-01

Tolerances for fasteners. Part 3: Plain washers for bolts, screws and nuts. Product grades A and C. (ISO 4759-3:2000).
紧固件的公差 第3部分:螺栓、螺钉和螺母用平垫圈 产品等级A和C（ISO 4759-3-2000）

2000-12-12