BS ISO 20207:2015提出了先进的调制技术（QPSK， 8PSK、16APSK和32APSK）以及广泛的编码速率（从1/4到9/10） 近香农编码方案（LDPC码）。这种大量的调制和编码 方案允许多种可能性来满足特定的任务约束。此外，为了最大限度地提高遥测系统的吞吐量，似乎可以调整 传输波形（和有用的数据速率）到链路的可变条件。这个 DVB-S2标准实际上可以实现可变编码和调制（VCM）模式， 使传输方案适应预定时间后的信道条件 计划（例如，遵循动态链接预算）。当频道对用户可用时 提供反馈（例如，通过遥控链路），传输方案可以动态调整 使用自适应编码和调制（ACM）模式进行调整。 使用DVB-S2标准进行遥测，使得使用通用的非常高的频率成为可能 大规模集成电路（VHSIC）硬件描述语言（VHDL）智能 用于开发的属性（IP）模块。广泛实施的标准的使用 简化了寻找发射或接收设备以检查兼容性的过程。最后，对于 接地部分，一些电信DVB-S2接收器或专用集成电路 为电信市场开发的ASIC可以重复使用。本推荐标准是描述如何使用DVB-S2的自适应配置文件 用于传输用于遥测目的的CCSDS传输帧的标准。之间的接口 CCSDS和DVB-S2基于连接的同步标记（ASM）和信道 参考文献[2]中已经介绍了访问数据单元（CADU）。交叉引用:CCSDS 131.0-B-2CCSDS 132.0-B-1CCSDS 732.0-B-2ISO/IEC 7498-1:1994ISO/IEC 10731: 1994年购买本文件时，所有当前可用的修订都包括在购买本文件中。

BS ISO 20207:2015 proposes advanced modulation techniques (QPSK, 8PSK, 16APSK, and 32APSK) and a wide range of coding rates (from 1/4 to 9/10) with near-Shannon coding schemes (LDPC codes). This high number of modulation and coding schemes allows a wide range of possibilities to satisfy specific mission constraints.Moreover, to maximize the telemetry system throughput, it appears possible to adapt the transmitted waveform (and the useful data rate) to the variable conditions of the link. The DVB-S2 standard can actually implement Variable Coding and Modulation (VCM) mode, which adapts the transmission scheme to the channel conditions following a predetermined schedule (for example, following a dynamic link budget). When a channel is available to provide feedback (e.g., via a telecommand link), the transmission scheme can be dynamically adjusted using the Adaptive Coding and Modulation (ACM) mode.The use of the DVB-S2 standard for telemetry makes possible the use of generic Very High Scale Integrated Circuits (VHSIC) Hardware Description Language (VHDL) Intellectual Property (IP) modules for developments. The use of a widely implemented standard simplifies finding transmitting or receiving equipment to check compatibility. Finally, for the ground part, some telecom DVB-S2 receivers or Application Specific Integrated Circuits (ASICs) developed for the telecom market could be reused.This Recommended Standard is an adaptation profile describing how to use the DVB-S2 standard to transmit CCSDS Transfer Frames for telemetry purpose. The interface between CCSDS and DVB-S2 is based on the Attached Synchronization Marker (ASM) and Channel Access Data Unit (CADU) already introduced in reference [2].Cross References:CCSDS 131.0-B-2CCSDS 132.0-B-1CCSDS 732.0-B-2ISO/IEC 7498-1:1994ISO/IEC 10731:1994All current amendments available at time of purchase are included with the purchase of this document.