现行

BS EN 993-19-2004

Methods of test for dense shaped refractory products-Determination of thermal expansion by a differential method
致密成型耐火制品的试验方法 用微分法测定热膨胀

2007-06-29

现行

DIN EN 993-19

Methods of test for dense shaped refractory products - Part 19: Determination of thermal expansion by a differential method
致密成型耐火制品的试验方法.第19部分:用差分法测定热膨胀；德语版本EN 993-19:2004

2004-08-01

现行

UNE-EN 993-19-2004

Methods of test for dense shaped refractory products - Part 19: Determination of thermal expansion by a differential method
致密成型耐火制品的试验方法第19部分:用差分法测定热膨胀

2004-11-26

现行

JIS R 2207-3-2007

Test methods for thermal expansion of refractory products -- Part 3: Contact method using rod test piece
耐火制品热膨胀试验方法第3部分:棒试件接触法

2007-01-01

现行

JIS R 2207-2-2007

Test methods for thermal expansion rate of refractory products -- Part 2: Contact method using cylinder test piece
耐火制品热膨胀率试验方法第2部分:圆筒试件接触法

2007-01-01

现行

DIN EN 993-11

Methods of test for dense shaped refractory products - Part 11: Determination of resistance to thermal shock
致密成型耐火制品的试验方法.第11部分:抗热震性的测定；德文版EN 993-11:2007

2008-03-01

现行

UNE-EN 993-11-2008

Methods of test for dense shaped refractory products - Part 11: Determination of resistance to thermal shock
致密成型耐火制品的试验方法第11部分:抗热震性的测定

2008-07-02

现行

DIN EN 993-15

Methods of test for dense shaped refractory products - Part 15: Determination of thermal conductivity by the hot-wire (parallel) method
致密成型耐火制品的试验方法.第15部分:用热线（平行）法测定热导率；德文版EN 993-15:2005

2005-07-01

现行

DIN EN 1094-1

Insulating refractory products - Part 1: Terminology, classification and methods of test for high temperature insulation wool products
隔热耐火制品.第1部分:高温隔热羊毛制品的术语、分类和试验方法；德文版EN 1094-1:2008

2008-09-01

现行

ISO 12680-1-2005

Methods of test for refractory products — Part 1: Determination of dynamic Young's modulus (MOE) by impulse excitation of vibration
耐火制品试验方法第1部分:动态杨氏硬度的测定；振动脉冲激励下的s模量（MOE）

2005-06-20

现行

UNE-EN 993-1-1996

METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS. PART 1: DETERMINATION OF BULK DENSITY, APPARENT POROSITY AND TRUE POSORITY.
致密成型耐火制品的试验方法 第1部分:体积密度、表观孔隙率和真实孔隙度的测定

1996-04-23

现行

DIN EN ISO 12680-1

Methods of test for refractory products - Part 1: Determination of dynamic Young's modulus (MOE) by impulse excitation of vibration (ISO 12680-1:2005)
耐火制品的试验方法.第1部分:用振动脉冲激励法测定动态杨氏模量（MOE）（ISO 12680-1-2005）；德文版EN ISO 12680-1:2007

2007-05-01

现行

UNE-EN ISO 12680-1-2007

Methods of test for refractory products - Part 1: Determination of dynamic Youngs modulus (MOE) by impulse excitation of vibration (ISO 12680-1:2005)
耐火制品的试验方法.第1部分:通过振动脉冲激励测定动态杨氏模量（MOE）（ISO 12680-1-2005）

2007-09-12

现行

DIN EN 993-11-DRAFT

Draft Document - Methods of test for dense shaped refractory products - Part 11: Determination of resistance to thermal shock; German version prEN 993-11:2007
文件草案.致密成型耐火制品的试验方法.第11部分:抗热震性的测定；德文版prEN 993-11:2007

2007-08-01

现行

GOST R 53065.1-2008

Изделия огнеупорные с общей пористостью менее 45 %. Метод определения предела прочности при сжатии при комнатной температуре. Часть 1. Испытание без применения прокладок
具有小于45％真实孔隙率的耐火产品 室温下抗压强度测定方法 第1部分没有包装测试

现行

DIN EN 13687-1

Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion
混凝土结构保护和维修用产品和系统.试验方法；热兼容性的测定.第1部分:除冰盐浸泡的冻融循环；德语版DIN EN 13687-1:2002

2002-05-01

现行

UNE-EN 13687-1-2002

Products and systems for the protection and repair on concrete structures - Test methods - Determination of thermal compability - Part 1: Freeze-thaw cycling with de-icing sal immersion.
混凝土结构保护和维修用产品和系统.试验方法.热兼容性的测定.第1部分:除冰浸泡的冻融循环

2002-10-29