AS 2331.3.2-2001-金属和相关涂层的试验方法方法3.2:腐蚀和相关性能试验-乙酸盐雾试验（ASS试验）-国家数字标准馆

现行 AS 2331.3.2-2001

到馆阅读

收藏跟踪

购买正版

Methods of test for metallic and related coatings, Method 3.2: Corrosion and related property tests - Acetic acid salt spray test (ASS test) 金属和相关涂层的试验方法方法3.2:腐蚀和相关性能试验-乙酸盐雾试验（ASS试验）

发布日期： 2001-07-17

规定了评估金属基材上无机和有机涂层耐腐蚀性的乙酸盐雾试验方法。试验柜内的条件受到高度控制，收集的试验溶液的pH值限制在3.1和3.3。

Specifies a method for the acetic acid salt spray test for the assessment of corrosion resistance of inorganic and organic coatings on metallic substrates. The conditions within the test cabinet are highly controlled with the pH of the collected test solution being limited to 3.1 and 3.3.

分类信息

发布单位或类别：澳大利亚-澳大利亚标准

关联关系

研制信息

相似标准/计划/法规

AS 2331.3.9-2001

Methods of test for metallic and related coatings, Method 3.9: Corrosion and related property tests - Metallic coatings - Porosity tests - Ferroxyl test
金属和相关涂层的试验方法方法3.9:腐蚀和相关性能试验-金属涂层-孔隙率试验-铁氧基试验

AS 2331.4.2-2004

Methods of test for metallic and related coatings, Method 4.2: Physical tests - Ductility
金属和相关涂层的试验方法方法4.2:物理试验-延展性

AS 2331.3.12-2006

Methods of test for metallic and related coatings, Method 3.12: Corrosion and related property tests - Cyclic salt fog/UV exposure of organically coated metal
金属和相关涂层的试验方法方法3.12:腐蚀和相关性能试验-有机涂层金属的循环盐雾/紫外线暴露

AS 2331.3.6-2001

Methods of test for metallic and related coatings, Method 3.6: Corrosion and related property tests - Electrographic porosity test
金属和相关涂层的试验方法方法3.6:腐蚀和相关性能试验-电图孔隙度试验

AS 2331.3.11-2004

Methods of test for metallic and related coatings, Method 3.11: Corrosion and related property tests - Chemical residue tests
金属和相关涂层的试验方法方法3.11:腐蚀和相关性能试验-化学残留物试验

AS 2331.1.3-2001

Methods of test for metallic and related coatings, Method 1.3: Local thickness tests - Magnetic method
金属和相关涂层的试验方法方法1.3:局部厚度试验-磁法

AS 2331.1.2-2001

Methods of test for metallic and related coatings, Method 1.2: Local thickness tests - Coulometric method
金属和相关涂层的试验方法方法1.2:局部厚度试验-库仑法

AS 2331.4.7-2006

Methods of test for metallic and related coatings, Method 4.7: Physical tests - Resistance to scratching
金属和相关涂层的试验方法方法4.7:物理试验-耐刮擦性

Methods of test for metallic and related coatings, Part 0: Method selection guide
金属和相关涂层的试验方法第0部分:方法选择指南

AS 2331.3.10-2001

Methods of test for metallic and related coatings, Method 3.10: Corrosion and related property tests - Cracks and pores in chromium
金属和相关涂层的试验方法方法3.10:腐蚀和相关性能试验-铬中的裂纹和孔隙

AS 2331.4.1-2001

Methods of test for metallic and related coatings, Method 4.1: Physical tests - Qualitative adhesion tests
金属和相关涂层的试验方法方法4.1:物理试验-定性附着力试验

AS 2331.1.6-2004

Methods of test for metallic and related coatings, Method 1.6: Local thickness tests - Taper section method
金属和相关涂层的试验方法方法1.6:局部厚度试验-锥形截面法

AS 2331.1.5-2001

Methods of test for metallic and related coatings, Method 1.5: Local thickness tests - Beta-backscatter method
金属和相关涂层的试验方法方法1.5:局部厚度试验-β背散射法

AS 2331.3.4-2001

Methods of test for metallic and related coatings, Method 3.4: Corrosion and related property tests - Thioacetamide anti-tarnish and porosity test
金属和相关涂层的试验方法方法3.4:腐蚀和相关性能试验-硫代乙酰胺防变色和孔隙率试验

AS 2331.3.1-2001

Methods of test for metallic and related coatings, Method 3.1: Corrosion and related property tests - Neutral salt spray test (NSS test)
金属和相关涂层的试验方法方法3.1:腐蚀和相关性能试验-中性盐雾试验（NSS试验）

AS 2331.3.13-2006

Methods of test for metallic and related coatings, Method 3.13: Corrosion and related property tests - Wet (salt fog)/dry/humidity
金属和相关涂层的试验方法方法3.13:腐蚀和相关性能试验-湿（盐雾）/干/湿

AS 2331.3.5-2001

Methods of test for metallic and related coatings, Method 3.5: Corrosion and related property tests - Sulfur dioxide/hydrogen sulfide porosity tests
金属和相关涂层的试验方法方法3.5:腐蚀和相关性能试验-二氧化硫/硫化氢孔隙率试验

AS 2331.4.4-2001

Methods of test for metallic and related coatings, Method 4.4: Physical test - Assessment of intensity of shot-peening
金属和相关涂层的试验方法方法4.4:物理试验-喷丸强度评估

AS 2331.2.3-2001

Methods of test for metallic and related coatings, Method 2.3: Tests for average coating mass per unit area or for thickness - Hydrogen evolution method for zinc coatings
金属和相关涂层的试验方法方法2.3:单位面积平均涂层质量或厚度试验-锌涂层的析氢法

AS 2331.4.5-2001

Methods of test for metallic and related coatings, Method 4.5: Physical tests - Electroplated plastics - Thermal cycling tests
金属和相关涂层的试验方法方法4.5:物理试验-电镀塑料-热循环试验

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统