BS EN 61169-47:2015是分规范（SS），提供了信息和规则 用于制备夹耦合射频同轴连接器的详细规范（DS）， 通常用于75Ω电缆网络（F-Quick型）。它描述了与计量信息、电气和机械的接口尺寸 性能，包括从IEC 61169-1:2013中选择的强制性试验，适用于所有 与F型快速连接器有关的DS。本规范说明了需要考虑的推荐性能特征 在编写DS时，包括测试计划和检查要求。 注:该接口通常用于室内连接，易于断开和重新连接。典型应用是F型同轴接收器引线或F型同轴插接线。该接口也可以称为推入式连接器。根据IEC 61169-24:2009，最好使用F型固定（螺纹）连接器。交叉引用:IEC 61169-1:2013IEC 61169-24:2009IEC 62037IEC 62037-3EN 61169-1:2013EN 61169-24:2009EN 62037EN 62037-3购买本文件时可用的所有现行修订版均包含在购买本文件中。

BS EN 61169-47:2015, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for RF coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick).It describes the interface dimensions with gauging information, electrical and mechanical performance including the mandatory tests selected from IEC 61169-1:2013, applicable to all DS relating to type F-Quick connectors.This specification indicates the recommended performance characteristics to be considered when writing a DS and covers test schedules and inspection requirements.NOTE This interface is typically used for indoor connections, which are easily disconnected and reconnected. The typical application is for F-type coaxial receiver leads or F-type coaxial patch cables. The interface may also be known as a Push-on connector. It is preferred to use the fixed (screwed) connectors type F according to IEC 61169-24:2009.Cross References:IEC 61169-1:2013IEC 61169-24:2009IEC 62037IEC 62037-3EN 61169-1:2013EN 61169-24:2009EN 62037EN 62037-3All current amendments available at time of purchase are included with the purchase of this document.