首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 BS EN ISO 17348:2016
到馆提醒
收藏跟踪
购买正版
Petroleum and natural gas industries. Materials selection for high content CO<sub>2</sub> environment for casings, tubings and downhole equipment 石油和天然气工业 套管、油管和井下设备用高含量CO<sub>2</sub>环境的材料选择
发布日期: 2016-03-31
本国际标准为这两种材料的材料选择提供了指南和要求 二氧化碳注入井和采气井用无缝套管和油管以及井下设备 在高压和高二氧化碳含量的环境中[高于10%(摩尔)的二氧化碳和1兆帕的二氧化碳分压]。本国际标准不包括油井。这个国际 本标准仅考虑材料与环境的兼容性。给出了以下指南:腐蚀评估;材料选择;腐蚀控制。本国际标准针对的是高二氧化碳含量的油井,其中低pH和二氧化碳腐蚀的威胁最大。然而,许多方面同样适用于包含较低成本的环境 二氧化碳浓度。材料选择受许多因素和协同效应的影响,应通过以下两种方式进行: 材料或腐蚀工程师。 交叉引用:ISO 11960ISO 13680ISO 15156ISO 21457ISO 23936-1ISO 23936-2ISO 14310ISO/TS 16530-2ASTM D790ASTM D2290ASTM D2344ASTM D2583API 5LD 2009API RP 15CLTISO 17078-1:2004购买本文件时提供的所有当前修订版均包括在内。
This International Standard provides guidelines and requirements for material selection of both seamless casing and tubing, and downhole equipment for CO2gas injection and gas production wells with high pressure and high CO2content environments [higher than 10 % (molar) of CO2and 1 MPa CO2partial pressure]. Oil production wells are not covered in this International Standard. This International Standard only considers materials compatibility with the environment.Guidance is given for the following:corrosion evaluation;materials selection;corrosion control.This International Standard is aimed at high CO2content wells, where the threat of low pH and CO2corrosion is greatest. However, many aspects are equally applicable to environments containing lower CO2concentrations.Materials selection is influenced by many factors and synergies and should be performed by either materials or corrosion engineer.Cross References:ISO 11960ISO 13680ISO 15156ISO 21457ISO 23936-1ISO 23936-2ISO 14310ISO/TS 16530-2ASTM D790ASTM D2290ASTM D2344ASTM D2583API 5LD 2009API RP 15CLTISO 17078-1:2004All current amendments available at time of purchase are included with the purchase of this document.
分类信息
发布单位或类别: 英国-英国标准学会
关联关系
研制信息
相似标准/计划/法规
现行
GB/T 40543-2021
石油天然气工业 高含CO2环境用套管、油管及井下工具的材料选择
Petroleum and natural gas industries—Materials selection for high content CO2 for casing, tubing and downhole equipment
2021-08-20
现行
ISO 17348-2016
Petroleum and natural gas industries — Materials selection for high content CO2 for casing, tubing and downhole equipment
石油和天然气工业.套管、油管和井下设备用高含量CO2的材料选择
2016-02-10
现行
KS B ISO 16903(2022 Confirm)
석유 및 천연 가스 산업 - 설계에 영향을 미치는 LNG의 특성과 재료 선택
石油和天然气工业.影响设计和材料选择的液化天然气特性
2017-12-28
现行
KS B ISO 16903
석유 및 천연 가스 산업 - 설계에 영향을 미치는 LNG의 특성과 재료 선택
石油和天然气工业 - Lng的特点 影响设计和材料选择
2017-12-28
现行
BS EN ISO 16903-2015
Petroleum and natural gas industries. Characteristics of LNG, influencing the design, and material selection
石油和天然气工业 液化天然气的特性、影响设计和材料选择
2015-06-30
现行
ISO 16903-2015
Petroleum and natural gas industries — Characteristics of LNG, influencing the design, and material selection
石油和天然气工业 - Lng的特点 影响设计和材料选择
2015-06-10
现行
SY/T 7457-2019
石油.石化和天然气工业油气生产系统的材料选择和腐蚀控制
Petroleum, petrochemical and natural gas industries-Materials selection and corrosion control for oil and gas production systems
2019-11-04
现行
BS EN ISO 21457-2010
Petroleum, petrochemical and natural gas industries. Materials selection and corrosion control for oil and gas production systems
石油、石化和天然气工业 油气生产系统的材料选择和腐蚀控制
2010-09-30
现行
ISO 21457-2010
Petroleum, petrochemical and natural gas industries — Materials selection and corrosion control for oil and gas production systems
石油、石化和天然气工业——油气生产系统的材料选择与腐蚀控制
2010-09-03
现行
DIN EN ISO 16903
Petroleum and natural gas industries - Characteristics of LNG, influencing the design and material selection (ISO 16903:2015)
石油和天然气工业.影响设计和材料选择的液化天然气特性(ISO 16903-2015)
2015-11-01
现行
DIN EN ISO 21457
Petroleum, petrochemical and natural gas industries - Materials selection and corrosion control for oil and gas production systems (ISO 21457:2010)
石油、石化和天然气工业.石油和天然气生产系统的材料选择和腐蚀控制(ISO 21457-2010)
2010-12-01
现行
BS EN ISO 15156-1-2020
Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production-General principles for selection of cracking-resistant materials
石油和天然气工业 石油和天然气生产中用于含硫化氢环境的材料
2020-12-01
现行
AS 21457-2022
Petroleum, petrochemical and natural gas industries - Materials selection and corrosion control for oil and gas production systems (ISO 21457:2010, MOD)
石油、石化和天然气工业.石油和天然气生产系统的材料选择和腐蚀控制(ISO 21457-2010 MOD)
2022-05-13
现行
KS B ISO 15156-1
석유와 천연가스 산업 — 오일과 가스 생산에서 H2S 함유 환경에서 사용하기 위한 재료 — 제1부: 균열 방지 재료의 선택을 위한 일반 원칙
石油和天然气工业.油气生产中用于含H2S环境的材料.第1部分:耐开裂材料选择的一般原则
2022-07-01
现行
KS B ISO 15156-1(2020 Confirm)
석유 및 천연 가스 산업-H2S가 포함된 오일 및 가스 제품 생산에 사용되는 재질-제1부:내균열성 재료의 선택을 위한 일반 원칙
石油和天然气工业 - 材料在石油和天然气生产环境中含硫化氢使用 - 第1部分:总则开裂 耐磨材料的选择
2015-12-21
现行
GB/T 20972.1-2007
石油天然气工业 油气开采中用于含硫化氢环境的材料 第1部分:选择抗裂纹材料的一般原则
Petroleum and natural gas industries - Material for use in H2S - containing environments in oil and gas production - part 1: General principles for selection of cracking-resistant materials
2007-06-25
现行
GOST R 53679-2009
Нефтяная и газовая промышленность. Материалы для применения в средах, содержащих сероводород, при добыче нефти и газа. Часть 1. Общие принципы выбора материалов, стойких к растрескиванию
石油和天然气工业 用于石油和天然气生产的含H2S的环境中的材料 第1部分选择抗裂材料的一般原则
现行
ISO 15156-1-2020
Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 1: General principles for selection of cracking-resistant materials
石油和天然气工业 - 用于石油和天然气生产中含H2S的环境中使用的材料 - 第1部分:选择抗裂材料的一般原则
2020-11-17
现行
AS 15156.1-2022
Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production, Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2020, MOD)
石油和天然气工业用于H
2022-05-13
现行
DIN EN ISO 17348
Petroleum and natural gas industries - Materials selection for high content CO<(Index)2> environment for casings, tubings and downhole equipment (ISO 17348:2016); English version EN ISO 17348:2016
石油和天然气工业.套管、油管和井下设备用高含量CO2环境的材料选择(ISO 17348-2016);英语版EN ISO 17348:2016
2016-07-01