BS IEC 61747-40-5:2018是一种适用于建筑用覆盖玻璃的机械性能测试程序 移动设备中的电子显示屏。本文件主要介绍表面粗糙度的测量 由于尖锐颗粒碰撞到试样表面而使试样断裂所需的冲击能量 覆盖玻璃的表面。这是通过将一个球落在一片涂层磨料上实现的 放置在刚性支撑的玻璃盖上。故障模式与 通过锐利接触造成损坏。 裂纹扩展是由中心张力增强的 强化玻璃的情况。此故障模式代表几种现场故障之一 在移动设备中观察到的模式。交叉引用:JIS R6111ISO 8512-2ISO 6344-1IEC 61747-40-1购买时可用的所有当前修订版均包含在本文件的购买中。

BS IEC 61747-40-5:2018 is a mechanical performance testing procedure for cover glass used in electronic displays in mobile devices. This document focuses on the measurement of surface impact energy required to fracture a specimen due to the collision of sharp particles onto the surface of a cover glass. This is achieved by dropping a ball on a sheet of coated abrasives placed on the cover glass, which is rigidly supported. The failure mode is associated with damage introduction via sharp contact. Crack propagation is enhanced by central tension in the case of strengthened glass. This failure mode represents one of several field failure modes observed in mobile devices.Cross References:JIS R6111ISO 8512-2ISO 6344-1IEC 61747-40-1All current amendments available at time of purchase are included with the purchase of this document.