现行

BS ISO 8434-2-2007

Metallic tube connections for fluid power and general use-37° flared connectors
流体动力和一般用途的金属管接头

2007-11-30

现行

SAE AS4395B

FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD
扩口管接头 设计标准

2013-01-07

现行

HB 5966-2008

24°无扩口导管连接件通用规范
General specification for 24°flareless tube connection

2008-03-17

现行

NASA KSC-F-124

SPECIFICATION FOR FITTINGS, FLARED TUBE
扩口管配件规范

1994-01-31

现行

SAE AS4396B

FITTING END, BULKHEAD, FLARED, TUBE CONNECTION, DESIGN STANDARD
管件端部 隔板 扩口 管连接 设计标准

2013-01-07

现行

MIL MIL-DTL-18866K

FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, GENERAL SPECIFICATION FOR
37度无扩口液压管配件通用规范

2020-07-21

现行

MIL MIL-DTL-18866J Amendment 2

FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, GENERAL SPECIFICATION FOR
扩口37度和无扩口液压管配件通用规范

2017-01-20

现行

MIL MIL-DTL-18866J Supplement 1

FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, GENERAL SPECIFICATION FOR
扩口37度和无扩口液压管配件通用规范

2018-03-14

现行

MIL MIL-DTL-18866J Amendment 1

FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, GENERAL SPECIFICATION FOR
扩口37度和无扩口液压管配件通用规范

2016-06-07

现行

ISO 8434-2-2007

Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors
流体动力和通用金属管接头第2部分:37度扩口接头

2007-08-28

现行

SAE AS1078A

FITTING END, FLARED TUBE CONNECTION, EXTENDED THREAD, DESIGN STANDARD
配件端 扩口管连接 延长螺纹 设计标准

2015-04-28

现行

SAE AS1858A

Fitting End, Non-Reversible, Flared Tube Connection, Oversize Thread
配件端 不可逆 扩口管连接 超大螺纹

2002-07-15

现行

GOST 13954-1974

Концы труб развальцованные для соединений трубопроводов по наружному конусу. Конструкция и размеры
扩口管末端用于外锥管上的管连接 施工和尺寸

现行

SAE AS1985D

FITTING,ASSEMBLY, ADAPTER RING LOCKED PORT CONNECTION TO FLARED TUBE END
接头、组件、适配器环锁定端口连接至扩口管端

2011-07-12

现行

SAE AS5310A

FITTING END, BULKHEAD, SPHERICAL, 37° FLARED TUBE CONNECTION DESIGN STANDARD
37°扩口管连接设计标准球形隔板接头端

2015-04-22

现行

MIL MS28884E Notice 1-Inactivation

VALVE, FUEL CHECK, LOW PRESSURE, FLARED TUBE CONNECTION, TYPE A (SUPERSEDING MS28884D)
A型低压扩口管连接燃油止回阀（取代MS28884D）

1998-10-15

现行

QPL QPL-32330 Revision 1

Hose Assembly, Conductive Polytetrafluoroethylene Tube, Smooth Bore, Flared and Flareless, Tube to Hose, with Swivel Nut, General Specification for
软管组件 带旋转螺母的管对软管 光滑孔 扩口和无扩口的聚四氟乙烯导电管 通用规范

2009-10-30

现行

QPL QPL-32330 Revision 4

Hose Assembly, Conductive Polytetrafluoroethylene Tube, Smooth Bore, Flared and Flareless, Tube to Hose, with Swivel Nut, General Specification for
软管组件 带旋转螺母的管对软管 光滑孔 扩口和无扩口的聚四氟乙烯导电管 通用规范

2014-05-19

现行

QPL QPL-32330 Revision 6

Hose Assembly, Conductive Polytetrafluoroethylene Tube, Smooth Bore, Flared and Flareless, Tube to Hose, with Swivel Nut, General Specification for
软管组件 带旋转螺母的管对软管 光滑孔 扩口和无扩口的聚四氟乙烯导电管 通用规范

2017-06-19

现行

QPL QPL-32330 Revision 3

Hose Assembly, Conductive Polytetrafluoroethylene Tube, Smooth Bore, Flared and Flareless, Tube to Hose, with Swivel Nut, General Specification for
软管组件 带旋转螺母的管对软管 光滑孔 扩口和无扩口的聚四氟乙烯导电管 通用规范

2012-11-13