1.1 这些测试方法涵盖锰矿中常见二氧化锰的测定。该测定测量样品中存在的锰(IV)的量。结果可以表示为可用氧或二氧化锰。包括以下测试方法，并且可以互换使用: 章节 试验方法A（硫酸亚铁铵） 9– 13 试验方法B（高碘酸盐（草酸钠） 14– 18 1.2 以SI单位表示的值被视为标准值。本标准不包括其他计量单位。 1.3 本标准并不旨在解决与其使用相关的所有安全性问题（如果有）。本标准的使用者有责任在使用前建立适当的安全、健康和环境实践并确定法规限制的适用性。1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。 ======意义和用途====== 4.1 该测试方法旨在测试锰矿石中二氧化锰含量是否符合成分质量标准。假设所有使用这些程序的人员都是训练有素的分析员，能够熟练和安全地执行常见的实验室程序。预计工作将在设备适当的实验室中进行，并遵循适当的废物处理程序。应遵循适当的质量控制实践，如指南中所述 E882 .

1.1 These test methods cover the determination of manganese dioxide in amounts commonly found in manganese ore. The determination measures the amount of manganese (IV) present in the sample. The result may be expressed as available oxygen or as manganese dioxide. The following test methods are included and may be used interchangeably: Sections Test Method A (Ferrous Ammonium Sulfate) 9 – 13 Test Method B (Periodate (Sodium Oxalate) 14 – 18 1.2 The values stated in SI units are regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 This test method is intended to test for compliance with compositional specifications for manganese dioxide content in manganese ores. It is assumed that all who use these procedures will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly equipped laboratory and that proper waste disposal procedures will be followed. Appropriate quality control practices shall be followed, such as those described in Guide E882 .