IEC 60332-1-3:20 04+A1:2015规定了当单个垂直电绝缘导体或电缆或光纤电缆经受规定的火灾条件时，评估坠落的燃烧液滴/颗粒的测试程序。注-如果需要，IEC 60332-1-3的测试可以与IEC 60332-1-2的测试同时进行。附件A中给出了推荐的性能要求。IEC 60332-1-3规定了1 kW预混合火焰的使用，并且用于一般用途，但规定的程序可能不适用于总横截面小于0.5 mm2的小型单根绝缘导体或电缆的测试，因为导体在测试完成前熔化，或者不适用于小型光缆的测试，因为电缆在测试完成前断裂。根据IEC指南104，具有团体安全出版物的状态。 本合并版本由第一版（2004年）组成 及其修正案1（2015）。因此，无须在 本出版物的补充。

IEC 60332-1-3:2004+A1:2015 Specifies a test procedure for assessment of falling flaming droplets/particles when a single vertical electrical insulated conductor or cable, or optical fibre cable, is subjected to defined fire conditions. NOTE - Testing to IEC 60332-1-3 may be performed simultaneously with that to IEC 60332-1-2, if required. Recommended requirements for performance are given in Annex A. IEC 60332-1-3 specifies the use of a 1 kW pre-mixed flame and is for general use, except that the procedure specified may not be suitable for the testing of small single insulated conductors or cables of less than 0,5 mm2 total cross-section because the conductor melts before the test is completed, or for the testing of small optical fibre cables because the cable is broken before the test is completed. Has the status of a group safety publication in accordance with IEC Guide 104. This consolidated version consists of the first edition (2004) and its amendment 1 (2015). Therefore, no need to order amendment in addition to this publication.