首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 AWWA ACE70837
到馆提醒
收藏跟踪
购买正版
Side-by-Side Performance Testing of Dewatering Equipment 脱水设备的并列性能测试
发布日期: 2009-11-01
本powerpoint演示首先简要概述了Aqua America及其运营地点,重点介绍了Aqua Pa Pickering Creek水处理厂(WTP)和浓缩/干燥污泥的去除。本研究的目的是使用中试设备模拟实际脱水操作,以降低长期污泥管理成本。测试协议的发展 介绍了典型脱水操作的评估参数,以及三台带式压滤机(BFP)的中试试验,以及考虑克服这些问题的选项 泻湖中的高固体,以及 并行性能测试。结论表明:测试方案的规划和开发 对成功的试点测试至关重要; 准备工作需要仔细考虑 设计; 执行需要仔细监测; 分析需要评估所有变量;和 在高温和潮湿环境中进行试验 夏天的日子,或是严寒的冬天都不是 推荐。包括桌子。
This powerpoint presentation begins by providing a brief overview of Aqua America and its operating locations, focusing on the Aqua-Pa Pickering Creek Water Treatment Plant (WTP) and removal of thickened/dried sludges. The objective of this study was to use pilot equipment to simulate actual dewatering operation to reduce long-term sludge management costs. The development of testing protocols and evaluation parameters of a typical dewatering operation is presented, along with pilot testing of three belt filter presses (BFPs), options considered to overcome high solids in the lagoon, and analytical results of side-by-side performance testing. Conclusions indicate that: planning and development of testing protocols are critical to a successful pilot testing; preparation requires thorough consideration and design; implementation requires careful monitoring; analysis requires the evaluation of all variables; and, conducting pilot testing in hot and humid summer days, or in harsh cold winter is not recommended. Includes tables.
分类信息
发布单位或类别: 美国-美国给水工程协会
关联关系
研制信息
相似标准/计划/法规
现行
ASTM F1605-14(2019)
Standard Test Method for Performance of Double-Sided Griddles
双面网格性能的标准试验方法
2019-05-01
现行
GB/T 36230-2018
数控闭式多连杆压力机 性能要求与试验方法
CNC Straight-side link-drive press—Performance requirements and test methods
2018-05-14
现行
ASTM E1592-05(2017)
Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
通过均匀静压气压差对钣金屋面和侧板系统进行结构性能的标准试验方法
2017-10-01
现行
IEEE C62.34-2017
IEEE Standard for Test Methods and Performance of Low-Voltage (1000 V rms or Less) Surge Protective Devices Used on Secondary Distribution Systems (Between the Transformer Low-Voltage Terminals and the Line Side of the Service Equipment)
IEEE二次配电系统(变压器低压端子和服务设备线路侧之间)用低压(1000V rms或以下)浪涌保护装置的试验方法和性能标准
2017-10-27
现行
IEEE C62.62-2018
IEEE Standard Test Specifications for Surge-Protective Devices (SPDs) for Use on the Load Side of the Service Equipment in Low-Voltage (1000 V and Less) AC Power Circuits
IEEE低压(1000 V及以下)交流电源电路中服务设备负载侧用浪涌保护器(SPD)的标准试验规范
2018-08-14
现行
ISO 16900-5-2016/Amd 1-2018
Respiratory protective devices — Methods of test and test equipment — Part 5: Breathing machine, metabolic simulator, RPD headforms and torso, tools and verification tools — Amendment 1: RPD head forms front and side view
RPD头部形状前视图和侧视图
2018-10-02
现行
ETSI EN 300 674-1
ERM; Road Transport and Traffic Telematics; Dedicated Short Range Communication transmission equipment (500 kbit/s / 250 kbit/s) operating in the 5,8 GHz Industrial, Scientific and Medical (ISM) band; Part 1: General characteristics and test methods for Road Side Units (RSU) and On-Board Units (OBU)
呃;道路运输和交通远程信息处理;专用短程通信传输设备(500kbit/s/250kbit/s) 工作在5.8GHz工业、科学和医疗(ISM)频段;第1部分:路边装置(RSU)和车载装置(OBU)的一般特性和试验方法
2004-08-01
现行
DIN EN 300674-1
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Road Transport and Traffic Telematics (RTTT) - Dedicated Short Range Communication (DSRC) transmission equipment (500 kbit/s/250 kbit/s) operating in the 5.8 GHz Industrial, Scientific and Medical (ISM) band - Part 1: General characteristics and test methods for Road Side Units (RSU) and On-Board Units (OBU) (Endorsement of the English version EN 300674-1 V1.2.1 (2004-08) as German standard)
电磁兼容性和无线电频谱管理(ERM).道路运输和交通远程信息处理(RTTT).在5.8GHz工业、科学和医疗(ISM)频段工作的专用短程通信(DSRC)传输设备(500kbit/s/250kbit/s).第1部分:一般特征
2005-02-01