首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 BS PD ISO/TR 13086-2:2017
到馆提醒
收藏跟踪
购买正版
Gas cylinders. Guidance for design of composite cylinders-Bonfire test issues 气瓶 复合材料气缸设计指南
发布日期: 2018-02-09
BS PD ISO/TR 13086-2:2017阐述了火灾情况下复合材料气瓶的安全和性能主题。安全声明阐述了在使用中安全操作气瓶时应理解的主题。本文档的其余部分提供了对这些主题的基本理解。交叉引用:EN 12245:2009ISO 11439ANSI NGV 2:2007DOT FRP-1:1987ISO 11119-3购买时可用的所有现行修订版均包含在本文件的购买中。
BS PD ISO/TR 13086-2:2017 addresses the topic of safety and performance of composite cylinders in a fire situation. A statement of safety addresses the topics which should be understood in order to operate cylinders safely in service. The remainder of this document provides a basic level of understanding of these topics.Cross References:EN 12245:2009ISO 11439ANSI NGV 2:2007DOT FRP-1:1987ISO 11119-3All current amendments available at time of purchase are included with the purchase of this document.
分类信息
发布单位或类别: 英国-英国标准学会
关联关系
研制信息
相似标准/计划/法规
现行
ISO/TR 13086-2-2017
Gas cylinders — Guidance for design of composite cylinders — Part 2: Bonfire test issues
气瓶 - 复合气瓶设计指南 - 第2部分:篝火测试问题
2017-12-18
现行
BS PD ISO/TR 13086-3-2018
Gas cylinders. Guidance for design of composite cylinders-Calculation of stress ratios
气瓶 复合材料气缸设计指南
2018-10-05
现行
ISO/TR 13086-5-2022
Gas cylinders — Information for design of composite cylinders — Part 5: Impact testing of composite cylinders
气瓶.复合气瓶设计信息.第5部分:复合气瓶的冲击试验
2022-06-08
现行
ISO/TR 13086-3-2018
Gas cylinders — Guidance for design of composite cylinders — Part 3: Calculation of stress ratios
气瓶 - 复合气缸设计指南 - 第3部分:应力比的计算
2018-09-11
现行
ISO/TR 13086-4-2019
Gas cylinders — Guidance for design of composite cylinders — Part 4: Cyclic fatigue of fibres and liners
气瓶复合材料气瓶设计指南第4部分:纤维和衬垫的循环疲劳
2019-09-20
现行
BS PD ISO/TR 13086-1-2011
Gas cylinders. Guidance for design of composite cylinders-Stress rupture of fibres and burst ratios related to test pressure
气瓶 复合材料气缸设计指南
2012-02-29
现行
ISO/TR 13086-1-2011
Gas cylinders - Guidance for design of composite cylinders — Part 1: Stress rupture of fibres and burst ratios related to test pressure
气瓶.复合气瓶的设计指南Spart 1:纤维的应力断裂和与试验压力有关的破裂率
2011-09-01
现行
BS ISO 11119-1-2020
Gas cylinders. Design, construction and testing of refillable composite gas cylinders and tubes-Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l
气瓶 可重复充装复合气瓶和管的设计、建造和测试
2020-11-26
现行
KS B ISO 11119-1
가스 실린더 — 재충전용 복합재료 가스 실린더 및 튜브 — 설계, 제조 및 시험 — 제1부: 450 L 이하의 후프랩 섬유 강화 복합재료 가스 실린더 및 튜브
气瓶 - 可再填充复合气瓶和管 - 设计 构造和测试 - 第1部分:环箍包裹的纤维增强复合气瓶和管高达450升
2016-12-21
现行
KS B ISO 11119-1(2021 Confirm)
가스 실린더 — 재충전용 복합재료 가스 실린더 및 튜브 — 설계, 제조 및 시험 — 제1부: 450 L 이하의 후프랩 섬유 강화 복합재료 가스 실린더 및 튜브
气瓶.可重复充装的复合气瓶和管.设计 结构和试验.第1部分:450升以下的环形缠绕纤维增强复合气瓶和管
2016-12-21
现行
ISO 11119-1-2020
Gas cylinders — Design, construction and testing of refillable composite gas cylinders and tubes — Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l
气瓶可再充装复合气瓶和管的设计、结构和试验第1部分:450升以下的环形缠绕纤维增强复合气瓶和管
2020-11-23
现行
BS ISO 11119-4-2016
Gas cylinders. Refillable composite gas cylinders. Design, construction and testing-Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners
气瓶 可重复充装的复合气瓶 设计、施工和测试
2016-02-29
现行
ISO 11119-4-2016
Gas cylinders — Refillable composite gas cylinders — Design, construction and testing — Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners
气瓶.可重复充装的复合气瓶.设计 结构和试验.第4部分:带均载焊接金属内衬的150L以下全缠绕纤维增强复合气瓶
2016-02-12
现行
KS B ISO 11119-2
가스 실린더 — 재충전용 복합재료 가스 실린더 및 튜브 — 설계, 제조 및 시험 — 제2부: 450 L 이하의 하중을 분담하는 금속 라이너로 된 풀랩 섬유 강화 복합재료 가스 실린더 및 튜브
气瓶 - 可重复填充的复合气瓶和管 - 设计 构造和测试 - 第2部分:全包裹的纤维增强复合气瓶和管高达450 L带负载共享金属衬套
2016-12-21
现行
KS B ISO 11119-2(2021 Confirm)
가스 실린더 — 재충전용 복합재료 가스 실린더 및 튜브 — 설계, 제조 및 시험 — 제2부: 450 L 이하의 하중을 분담하는 금속 라이너로 된 풀랩 섬유 강화 복합재료 가스 실린더 및 튜브
气瓶.可重复充装的复合气瓶和管.设计 结构和试验.第2部分:带均载金属内衬的450L以下全缠绕纤维增强复合气瓶和管
2016-12-21
现行
ISO 11119-2-2020
Gas cylinders — Design, construction and testing of refillable composite gas cylinders and tubes — Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners
气瓶可重复充装复合气瓶和管的设计、结构和试验第2部分:带均载金属内衬的满包纤维增强复合气瓶和450升以下的管
2020-11-23
现行
ISO 11119-2-2020/Amd 1-2023
Gas cylinders — Design, construction and testing of refillable composite gas cylinders and tubes — Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners — Amendment 1
气瓶.可再填充复合气瓶和管道的设计、构造和试验.第2部分:带负载分担金属内衬的450升以下全包裹纤维增强复合气瓶和管.修改件1
2023-05-11
现行
ISO 11119-3-2020
Gas cylinders — Design, construction and testing of refillable composite gas cylinders and tubes — Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with non-load-sharing metallic or non-metallic liners or without liners
气瓶可再充装的复合材料气瓶和管材的设计、制造和试验第3部分:450升及以下带非均载金属或非金属衬里或无衬里的全包裹纤维增强复合材料气瓶和管材
2020-11-23
现行
ISO 11119-3-2020/Amd 1-2023
Gas cylinders — Design, construction and testing of refillable composite gas cylinders and tubes — Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with non-load-sharing metallic or non-metallic liners or without liners — Amendment 1
气瓶.可再填充复合材料气瓶和管的设计、结构和试验.第3部分:450升以下带非均载金属或非金属衬里或无衬里的全包裹纤维增强复合材料气瓶或管.修改件1
2023-07-11
现行
ISO 11515-2022
Gas cylinders — Refillable composite reinforced tubes of water capacity between 450 l and 3000 l — Design, construction and testing
气瓶.水容量在450l至3000l之间的可再填充复合增强管.设计、施工和试验
2022-08-24