1.1 本规程旨在概述一种参考超阈值区域材料气味强度的方法。 1.2 总体目标是参考样品的气味强度，而不是其他气味特性。 1.3 本规程旨在参考任何有气味材料的ASTM气味强度参考量表上的气味强度。这是通过将样品的气味强度与一系列浓度的参考气味剂（例如1-丁醇）的气味强度进行比较来实现的( n -丁醇）。 1.4 规定了由评估员评估参考加臭剂蒸汽的方法。 测试样品的呈现方式将取决于样品的性质，本文未对此进行定义。 1.5 测试样本的呈现应符合良好标准惯例 ( 指南 E3261 ，参考文献 1和 2. ) 2. 并应在测试报告中明确记录。 1.6 以国际单位制表示的值应被视为标准值。本标准不包括其他计量单位。 1.7 本标准并不旨在解决与其使用相关的所有安全问题（如果有的话）。本标准的使用者有责任在使用前建立适当的安全、健康和环境实践，并确定监管限制的适用性。 请参阅 附件A1 具体的安全数据。 1.8 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。

1.1 This practice is designed to outline a means for referencing the odor intensities of a material in the suprathreshold region. 1.2 The general objective is to reference the odor intensity rather than other odor properties of a sample. 1.3 This practice is designed to reference the odor intensity on the ASTM odor intensity referencing scale of any odorous material. This is done by a comparison of the odor intensity of the sample to the odor intensities of a series of concentrations of a reference odorant, for example, 1-butanol ( n -butanol). 1.4 The method by which the reference odorant vapors are to be presented for evaluation by the assessors is specified. The manner by which the test sample is presented will depend on the nature of the sample, and is not defined herein. 1.5 Test sample presentation should be consistent with good standard practice ( Guide E3261 , Refs 1 and 2 ) 2 and should be explicitly documented in the test report. 1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. See Annex A1 for specific safety data. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.