1.1 本试验方法包括测定磺化油或硫酸化油中所含的总氨。 1.2 以国际单位制表示的数值应视为标准。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 3.1 本试验分析方法旨在通过用过量碱煮沸样品的水溶液，并通过滴定煮沸后的碱损失来测定磺化油或硫酸化油样品中的总氨。

1.1 This test method covers determination of the total ammonia contained in sulfonated or sulfated oils. 1.2 The values stated in SI units are to be regarded as the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 3.1 This test method of analysis is intended to determine the total ammonia in a sample of sulfonated or sulfated oil, or both, by boiling a water solution of the sample with excess alkali and determining by titration the loss in alkali after the boiling.