Methods of test for masonry-Determination of initial shear strength
砌体的试验方法 初始剪切强度的测定

2007-11-30

Methods of test for ancillary components for masonry-Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it
砌体辅助构件的试验方法 复合过梁预制件与其上方砌体之间初始抗剪强度的测定

2012-09-30

Methods of test for ancillary components for masonry - Part 14: Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it
砌体辅助构件的试验方法.第14部分:复合过梁预制件和其上方砌体之间初始剪切强度的测定；德文版EN 846-14:2012

2012-11-01

BS EN 846-14. Methods of test for ancillary components for masonry. Part 14. Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it
英国标准EN 846-14 砌体辅助构件的试验方法 第14部分 复合过梁预制件与其上方砌体之间初始抗剪强度的测定

2010-02-03

Methods of test for ancillary components for masonry - Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement.
圬工辅助部件的试验方法.第3部分:预制底座接缝钢筋焊缝剪切荷载能力的测定

2001-01-31

Methods of test for masonry - Part 4: Determination of shear strength including damp proof course.
砌体的试验方法.第4部分:包括防潮层在内的抗剪强度的测定

2001-05-25

Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels.
砌体辅助构件的试验方法.第9部分:过梁抗弯和抗剪的测定

2001-01-31

Methods of test for ancillary components for masonry - Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement; English version of DIN EN 846-3
圬工辅助部件的试验方法.第3部分:预制底座接缝钢筋焊缝剪切荷载能力的测定；德文版EN 846-3:2000

2000-08-01

Methods of test for masonry units - Part 3: Determination of net volume and percentage of voids of clay masonry units by hydrostatic weighing
圬工单元的试验方法.第3部分:用静水压称重法测定粘土圬工单元的净体积和空隙率；德文版EN 772-3:1998

1998-10-01

METHODS OF TEST FOR MASONRY UNITS - PART 3: DETERMINATION OF NET VOLUME AND PERCENTAGE OF VOIDS OF CLAY MASONRY UNITS BY HYDROSTATIC WEIGHING.
圬工单位的试验方法.第3部分:用静水压称重法测定粘土圬工单位的净体积和空隙率

1999-04-19

METHODS OF TEST FOR MORTAR FOR MASONRY. PART 3: DETERMINATION OF CONSISTENCE OF FRESH MORTAR (BY FLOW TABLE)
圬工用砂浆的试验方法 第3部分:新拌砂浆稠度的测定（通过流动表）

2000-09-27

Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections).
砌体辅助构件的试验方法.第7部分:抗剪连接件和滑动连接件的剪切荷载能力和荷载位移特性的测定（砂浆接缝连接件的连接试验）

2001-01-31

Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units.
圬工单位的试验方法.第11部分:集料混凝土、人造石和天然石圬工单位由于毛细作用的吸水率和粘土圬工单位的初始吸水率的测定

2001-03-27

Methods of test for masonry - Part 4: Determination of shear strength including damp-proof course; English version of DIN EN 1052-4
砌体的试验方法.第4部分:包括防潮层在内的抗剪强度的测定；德文版EN 1052-4:2000

2000-09-01

BS EN 846-7. Methods of test for ancillary components for masonry. Part 7. Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)
英国标准EN 846-7 砌体辅助构件的试验方法 第七部分 抗剪拉杆和滑动拉杆的抗剪承载力和荷载位移特性的测定（砂浆接头连接的联轴节试验）

2010-02-03

BS EN 772-11. Methods of test for masonry units. Part 11. Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
英国标准EN 772-11 砌体构件的试验方法 第11部分 集料混凝土、蒸压加气混凝土、人造石和天然石砌块由于毛细作用的吸水率和粘土砌块的初始吸水率的测定

2010-06-29

Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table) (includes Amendments A1:2004 + A2:2006)
圬工用砂浆的试验方法.第3部分:新拌砂浆稠度的测定（通过流动表）；德文版EN 1015-3:1999+A1:2004+A2:2006

2007-05-01

Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling - Slant shear method
混凝土结构保护和修理用产品和系统.试验方法.第3部分:有或没有热循环的注射产品附着力的测定.斜剪法；德文版EN 12618-3:2004

2004-11-01

Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling - Slant shear method
混凝土结构保护和修理用产品和系统.试验方法.第3部分:有或没有热循环的注射产品附着力的测定.斜剪法

2006-01-25